Theses and dissertations (Engineering and Built Environment)
Permanent URI for this collectionhttp://ir-dev.dut.ac.za/handle/10321/10
Browse
2 results
Search Results
Item An investigation into the development of a portable, ultrasonic, density measuring instrument(1987) Hulse, Nigel Douglas; Stewart, A. B.In the gold mining industry, one of the significant physical properties of the mineral slurry is its density and it is important to be able to measure this parameter in most processes. There are many techniques for determining the density of fluids, but because of the hostile, abrasive nature of mineral slurry, very few of these are suitable, This dissertation describes the deveiopment, construction and testing of a portable, ultrasonic, density measuring instrument. The instrument uses an ultrasonic transducer as the primary measuring element, and system operation is based on the fact that the driving impedance of the transducer varies with changes in the physical properties, and hence the characteristic impedance, of the surrounding medium into which the ultrasonic energy is being transferred. The technique may a-Lao be used to measure the relative concentrations of two liquids in a mixture or emulsion, provided that the characteristic impedances of the liquids are sufficiently dissimilar. The electronic circuitry is fairly straightforward, consisting essentially of an oscillator, driving circuit for the transducer and a voltage monitor to provide a d.c. voltage proportional to the impedance of the transducer, and hence to the density of the surrounding medium. Most of the research has been concentrated on the probe design, as the type of transducer, the type and thickness of facing material and the method of construction all contribute to the sensitivity of the instrument. A design of probe assembly has been developed that may be used for both slurry density measurement and the measurement of the ratio of aqueous to organic liquids in emulsion.Item The design of digital signal processing electronics for a steel wire ropetesting instrument(1989) Nair, Dhavan; Scott, R. W.This thesis describes the design work undertaken at the Anglo American Electronics Laboratory to implement an electronic instrumentation system to evaluate the condition of steel wire ropes.