Research Publications (Engineering and Built Environment)
Permanent URI for this collectionhttp://ir-dev.dut.ac.za/handle/10321/215
Browse
8 results
Search Results
Item A shape control model for piezo-elastic structures based on divergence free electric displacement(Elsevier, 2003) Kekana, Marino; Tabakov, Pavel Y.; Walker, MarkA model simulating the effects of the control potential on the static configuration of a piezo-elastic structure is presented. This model is centred on the electric displacement field, which is shown to be divergence free. Thus, the surface charge effect no control over the configuration of a piezo-elastic structure, save for the control potential derived through passive or active control. Results show that at zero gain the proposed model resembles a structure free from piezoelectric control. Thus, no fictituous stiffness is introduced as is the case with models presented in the literature.Item Correlation between elastic and electric properties for cyclically loaded metals(Springer, 2005) Sevostianov, Igor; Bogarapu, Mahesh; Tabakov, Pavel Y.A new method of evaluation of the elastic property deterioration due to accumulated damage is suggested and experimentally verified. It is based on the explicit correlations between two groups of anisotropic properties – conductivity and elasticity, recently established for porous/microcracked materials with anistropic microstructures. An experimental study of fatigue has been done to verify the theoretical predictions. The electrical resistance and Young''s modulus are measured as functions of the number of loading cycles in the standard fatigue tests. The agreement between the theoretical predictions and the direct experimental data is better than 10% in all cases. The results allow one to use measurements of the electric resistance to estimate the damage accumulated in methal structures and the decrease of the elastic modulus.Item Multi-dimensional design optimisation of laminated structures using an improved genetic algorithm(2001) Tabakov, Pavel Y.The present study demonstrates a new variation of the genetic algorithm (GA) technique for engineering applications. This approach is highly efficient for many classes of engineering problems. The proposed selection of the best individuals and localised search makes the search more effective and rapidly improves the fitness value from generation to generation. Both continuous and discrete design variables are considered, and a comparative analysis of the performance of the algorithm is studied. The evaluation of the burst pressure of thick composite pressure vessels based on three-dimensional stress–strain analysis is considered here as an example. Exact elasticity solutions are obtained using the stress function approach where the radial, circumferential and shear stresses are determined taking the closed ends of the cylindrical shell into account.Item Stress distribution in continuously heterogeneous thick laminated pressure vessels(Elsevier, 2001) Verijenko, Viktor E.; Adali, Sarp; Tabakov, Pavel Y.Stress analysis of multilayered pressure vessels possessing cylindrical anisotropy and under internal, external and interlaminar pressures is given. The special case when the axis of anisotropy coincides with the axis of symmetry Oz and the stresses do not vary along the generator is investigated. In this case there exists a plane of elastic symmetry normal to this axis at every point of the cylinder so that each layer may be considered as orthotropic. However, elastic properties can vary through the thickness of a layer. Exact elasticity solutions are obtained for both open-ended and closed-ended cylinders using a stress function approach. The method of solution allows the forces on the layer interfaces to be taken into account with relative ease. Numerical results are presented for thick cylinders with isotropic and orthotropic layers, and stress distributions across the thickness are shown.Item Refined theory of laminated anisotropic shells for the solution of thermal stress problems(Taylor & Francis, 1999) Verijenko, Viktor E.; Tauchert, T. R.; Shaikh, C.; Tabakov, Pavel Y.A new higher order theory of laminated anisotropic shells for the solution of thermal stress problems that takes into account transverse shear stresses is developed.The theory is based on the kinematic hypotheses that were not assumed a priori but derived on the basis of an iterative technique. The hypotheses take into account the influence of the tangential components of the external loads and the temperature on distributions of the transverse shear stresses through the thickness of the shell. Some analytical solutions are obtained on the basis of the theory developed, and the results are compared with those available in the literature. The theory is also implemented on the basis of the finite element method, and a new triangular finite element is formulated. Some numerical results on the basis of this finite element are also presented.Item Lay-up optimization of multilayered anisotropic cylinders based on a 3-D elasticity solution(Elsevier, 2006) Tabakov, Pavel Y.; Summers, E. B.Exact elasticity solutions are obtained using the stress function approach, where the radial, circumferential and shear stresses are determined, taking into account the closed ends of the cylindrical shell. The system of the governing algebraic equations is derived to accurately analyse a multilayered pressure vessel with an arbitrary number of layers and any thickness. The approach used is straight-forward compared to other three-dimensional solutions found in the literature. The design of multilayered composite pressure vessels is accomplished using the genetic algorithm and subject to the Tsai–Wu failure criterion. The genetic algorithm is optimized to serve this particular problemItem Correlation between elastic and electric properties for cyclically loaded metals(Springer, 2002) Sevostianov, Igor; Bogarapu, Mahesh; Tabakov, Pavel Y.A new method of evaluation of the elastic property deterioration due to accumulated damage is suggested and experimentally verified. It is based on the explicit correlations between two groups of anisotropic properties – conductivity and elasticity, recently established for porous/microcracked materials with anistropic microstructures. An experimental study of fatigue has been done to verify the theoretical predictions. The electrical resistance and Young''s modulus are measured as functions of the number of loading cycles in the standard fatigue tests. The agreement between the theoretical predictions and the direct experimental data is better than 10% in all cases. The results allow one to use measurements of the electric resistance to estimate the damage accumulated in methal structures and the decrease of the elastic modulus.Item A technique for optimally designing engineering structures with manufacturing tolerances accounted for(Taylor & Francis, 2007) Tabakov, Pavel Y.; Walker, MarkAccurate optimal design solutions for most engineering structures present considerable difficulties due to the complexity and multi-modality of the functional design space. The situation is made even more complex when potential manufacturing tolerances must be accounted for in the optimizing process. The present study provides an in-depth analysis of the problem, and then a technique for determining the optimal design of engineering structures, with manufacturing tolerances in the design variables accounted for, is proposed and demonstrated. The examples used to demonstrate the technique involve the design optimization of simple fibre-reinforced laminated composite structures. The technique is simple, easy to implement and, at the same time, very efficient. It is assumed that the probability of any tolerance value occurring within the tolerance band, compared with any other, is equal, and thus it is a worst-case scenario approach. In addition, the technique is non-probabilistic. A genetic algorithm with fitness sharing, including a micro-genetic algorithm, has been found to be very suitable to use, and implemented in the technique. The numerical examples presented in the article deal with buckling load design optimization of an laminated angle ply plate, and evaluation of the maximum burst pressure in a thick laminated anisotropic pressure vessel. Both examples clearly demonstrate the impact of manufacturing tolerances on the overall performance of a structure and emphasize the importance of accounting for such tolerances in the design optimization phase. This is particularly true of the pressure vessel. The results show that when the example tolerances are accounted for, the maximum design pressure is reduced by 60.2% (in the case of a single layer vessel), and when five layers are specified, if the nominal fibre orientations are implemented and the example tolerances are incurred during fabrication, the actual design pressure could be 64% less than predicted.