Repository logo
 

Research Publications (Applied Sciences)

Permanent URI for this collectionhttp://ir-dev.dut.ac.za/handle/10321/213

Browse

Author: search.filters.author.Bux, FaizalHas files: No

Search Results

Now showing 1 - 6 of 6
  • No Thumbnail Available
    Item
    Investigation of combined effect of nitrogen, phosphorus and iron on lipid productivity of microalgae Ankistrodesmus falcatus KJ671624 using response surface methodology
    (Elsevier, 2015-02-15) Singh, Poonam; Guldhe, Abhishek; Kumari, Sheena K.; Rawat, Ismail; Bux, Faizal
    Enhancement of lipid accumulation is essential to improve the commercial feasibility of microalgal biodiesel production. An oleaginous microalgal strain, Ankistrodesmus falcatus KJ671624 was evaluated for its potential as a biodiesel feedstock in this study. The collective effect of nutrient (nitrogen, phospho-rous and iron) stresses on the lipid productivity of the selected strain was studied by response surface methodology. The highest lipid content of 59.6% and lipid productivity of 74.07 mg L−1 d−1 was obtained under nutrient stress with nitrogen 750 mg L−1, phosphorus 0 mg L−1 and iron 9 mg L−1. The photosyn-thetic behaviour validates the high lipid productivity under combined nutrient stress condition. Saturated fatty acid composition was increased by 38.49% under selected nutrient stress condition compared to BG11 medium. The enhanced lipid accumulation with suitable lipid profile (C16:0, C18:1, C18:2, C18:3) and biodiesel conversion of 91.54 ± 1.43% achieved in A. falcatus KJ671624 further confirm its potential as a promising feedstock for biodiesel production.
  • No Thumbnail Available
    Item
    Physiological responses of carbon-sequestering microalgae to elevated carbon regimes
    (Taylor and Fancis Online, 2016) Bhola, Virthie Kemraj; Swalaha, Feroz Mahomed; Nasr, Mahmoud; Kumari, Sheena K.; Bux, Faizal
    In order to identify a high carbon-sequestering microalgal strain, the physiological effect of different concentrations of carbon sources on microalgae growth was investigated. Five indigenous strains (I-1, I-2, I-3, I-4 and I-5) and a reference strain (I-0: Coccolithus pelagicus 913/3) were subjected to CO2 concentrations of 0.03–15% and NaHCO3 of 0.05–2 g CO2 l–1. The logistic model was applied for data fitting, as well as for estimation of the maximum growth rate (μmax) and the biomass carrying capacity (Bmax). Amongst the five indigenous strains, I-3 was similar to the reference strain with regards to biomass production values. The Bmax of I-3 significantly increased from 214 to 828 mg l–1 when CO2 concentration was increased from 0.03 to 15% (r = 0.955, P = 0.012). Additionally, the Bmax of I-3 increased with increasing NaHCO3 (r = 0.885, P = 0.046) and was recorded at 153 mg l–1 (at 0.05 g CO2 l–1) and 774 mg l–1 at (2 g CO2 l–1). Relative electron transport rate (rETR) and maximum quantum yield (Fv/Fm) were also applied to assess the impact of elevated carbon sources on the microalgal cells at the physiological level. Isolate I-3 displayed the highest rETR confirming its tolerance to higher quantities of carbon. Additionally, the decline in Fv/Fm with increasing carbon was similar for strains I-3 and the reference strain. Based on partial 28s ribosomal RNA gene sequencing, strain I-3 was homologous to the ribosomal genes of Chlorella sp.
  • No Thumbnail Available
    Item
    Biodiesel synthesis from microalgae using immobilized Aspergillus niger whole cell lipase biocatalyst
    (Elsevier, 2016) Guldhe, Abhishek; Singh, Poonam; Kumari, Sheena K.; Rawat, Ismail; Permaul, Kugen; Bux, Faizal
    Whole cell lipase catalysis and microalgal feedstocks make overall biodiesel synthesis greener and sustainable. In this study, a novel approach of whole cell lipase-catalyzed conversion of Scenedesmus obliquus lipids was investigated for biodiesel synthesis. Microalgal biodiesel was characterized for its fuel properties. Optimization of process parameters for immobilized Aspergillus niger whole cell lipase-catalyzed biodiesel synthesis was carried out. Highest biodiesel conversion of 53.76% was achieved from S. obliquus lipids at 35 °C, methanol to oil ratio of 5:1 and 2.5% water content based on oil weight with 6 BSPs (Biomass support particles). Step-wise methanol addition was applied to account for methanol tolerance, which improved biodiesel conversion upto 80.97% and gave 90.82 ± 1.43% yield. Immobilized A. niger lipase can be used for 2 batches without significant loss in conversion efficiency. Most of the fuel properties of biodiesel met the specifications set by international standards.
  • No Thumbnail Available
    Item
    A logistic model for the remediation of filamentous bulking in a biological nutrient removal wastewater treatment plant
    (IWA Publishing, 2015-08) Deepnarain, Nashia; Kumari, Sheena K.; Swalaha, Feroz Mahomed; Ramjith, J.; Tandoi, V.; Pillay, K.; Bux, Faizal
    Biological nutrient removal (BNR) systems across the globe frequently experience bulking and foaming episodes, which present operational challenges such as poor sludge settling due to excessive filamentous bacteria. A full-scale BNR plant treating primarily domestic wastewater was monitored over a period of 1 year to investigate filamentous bacterial growth response under various plant operating parameters. Identification of filamentous bacteria by conventional microscopy and fluorescent in situ hybridisation indicated the dominance of Eikelboom Type021N, Thiothrix spp., Eikelboom Type 1851 and Eikelboom Type 0092. A cumulative logit model (CLM) was applied to elucidate significant relationships between the filamentous bacteria and plant operational parameters. The model could predict the potential abundance of dominant filamentous bacteria in relation to wastewater treatment plant operational parameters. Data obtained from the model corroborated with previous findings on the dominance of most filaments identified, except for Type 0092, which exhibited some unique traits. With further validation, the model could be successfully applied for identifying specific parameters which could contribute towards filamentous bulking, thus, providing a useful tool for regulating specific filamentous growth in full-scale wastewater treatment plants.
  • No Thumbnail Available
    Item
    Biocatalytic conversion of lipids from microalgae Scenedesmus obliquus to biodiesel using Pseudomonas fluorescens lipase
    (Elsevier, 2015-01-31) Guldhe, Abhishek; Singh, Bhaskar; Rawat, Ismail; Perumal, Kugen; Bux, Faizal
    Conversion of microalgal lipids using biocatalyst is a novel and greener approach to produce biodiesel. Free and immobilized lipases from Candida sp. and Pseudomonas fluorescens along with free lipases from porcine pancreas and wheat germ were screened for biodiesel conversion of Scenedesmus obliquus lipids. Among selected lipases from various sources immobilized lipase from P. fluorescens showed superior biodiesel conversion. Optimization of reaction parameters viz. lipase amount, temperature, methanol to oil molar ratio and water content was carried out using response surface methodology. Best conversion of 66.55% was achieved at 35 °C, methanol to oil ratio of 3:1 with 10% enzyme amount and 2.5% water content based on oil weight. To tackle methanol tolerance step-wise methanol addition was applied, which improved biodiesel conversion upto 90.81%. Immobilized P. fluorescens lipase can be used for 4 batches without much loss in conversion efficiency (>95%). Biodiesel produced has the cetane number of 51.77, Calorific value of 37.67 MJ kg−1. Most of the fuel properties of biodiesel met the specifications set by ASTM and EN standards.
  • No Thumbnail Available
    Item
    Advances in synthesis of biodiesel via enzyme catalysis : Novel and sustainable approaches
    (Elsevier, 2015-01) Singh, Bhaskar; Mutanda, Taurai; Permaul, Kugen; Bux, Faizal; Guldhe, Abhishek
    Biodiesel, a renewable fuel has a great potential in fulfilling an ever-increasing transport fuel demand. The enzymatic conversion process of feedstock oil to biodiesel is greener when compared to the conventional approach of chemical conversion due to mild reaction conditions and less wastewater generation. Lipases obtained from various microbial sources have been widely applied as catalysts for the conversion of oil to biodiesel. Biodiesel and glycerol obtained by enzymatic conversion have shown a higher purity as compared to that obtained by other conversion techniques. Enzymatic conversion of oil to biodiesel is less energy intensive because of milder reaction conditions and fewer purification steps involved in processing. Lipases, due to their catalytic efficiency and specificity, have emerged as a great tool for converting a wide range of feedstock oils to biodiesel. This manuscript presents an overview of the use of enzymatic conversion for making biodiesel production sustainable and environmentally-friendly. The constraints of enzymatic conversion are the high cost of the enzyme and its inhibition by alcohol and glycerol. The possible solutions to overcome these constraints are discussed. Recent advances to develop an effective process for enzymatic conversion of feedstock oils into biodiesel are critically evaluated. Prospective and challenges in scaling up of this technology are also discussed.