Faculty of Engineering and Built Environment
Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/9
Browse
8 results
Search Results
Item Prospects of synthesized magnetic TiO2-based membranes for wastewater treatment : a review(MDPI AG, 2021-06) Tetteh, E. Kweinor; Rathilal, S.; Asante-Sackey, D.; Chollom, Martha NoroGlobal accessibility to clean water has stressed the need to develop advanced technologies for the removal of toxic organic and inorganic pollutants and pathogens from wastewater to meet stringent discharge water quality limits. Conventionally, the high separation efficiencies, relative low costs, small footprint, and ease of operation associated with integrated photocatalytic-membrane (IPM) technologies are gaining an all-inclusive attention. Conversely, photocatalysis and membrane technologies face some degree of setbacks, which limit their worldwide application in wastewater settings for the treatment of emerging contaminants. Therefore, this review elucidated titanium dioxide (TiO2), based on its unique properties (low cost, non-toxicity, biocompatibility, and high chemical stability), to have great potential in engineering photocatalytic-based membranes for reclamation of wastewater for re-use. The environmental pathway of TiO2 nanoparticles, membranes and configuration types, modification process, characteristics, and applications of IPMs in water settings are discussed. Future research and prospects of magnetized TiO2-based membrane technology is highlighted as a viable water purification technology to mitigate fouling in the membrane process and photocatalyst recoverability. In addition, exploring life cycle assessment research would also aid in utilizing the concept and pressing for large-scale application of this technology.Item Evaluation of veterinary antibiotics in a swine slaughterhouse wastewaters and their removal using advanced oxidation processes(2020-01) Chollom, Martha Noro; Rathilal, Sudesh; Swalaha, Feroz Mahomed; Bakare, Babatunde F.Antibiotics are found in low concentrations in water sources and surrounding environments. Despite their presence in low concentrations in the environment, they are associated with antibiotic resistant bacteria (ARBs) in water sources thus necessitating stringent legislations worldwide. The burden of ARBs has drawn worldwide attention into investigating this rising phenomena to better understand the seriousness of the effects of these contaminants. Studies conducted, however, have mostly been in the developed nations, and the focus has been on human pharmaceuticals. Information on veterinary pharmaceuticals is very limited, even though, the veterinary pharmaceuticals are known to cause as much havoc as human pharmaceuticals. Given the considerable impact that the veterinary antibiotics can have on humans and the environment, there is need for thorough investigations to be done regarding their detection and removal from water sources using biological and other appropriate technologies such as advanced oxidation methods. However, there is very little that has been done to date in this area globally and in South Africa in particular which highlights the novelty of this work. The findings of this study will therefore inform future decision making by policy makers and governments in handling these veterinary antibiotics in water sources. This study was divided into four phases covering the five objectives investigated. The first phase covered the first and second objectives, in which a suitable and sensitive analytical method was developed for the determination of veterinary antibiotics based upon solid phase extraction (SPE), ultrahigh liquid chromatography with photodiode array detectors (PDA) and mass spectrometry (MS) (UHPLC-PDA-MS). Four classes of antibiotics were selected: tetracycline, β-lactam, sulphonamides and fluoroquinolones. The studied antibiotics were extracted from slaughterhouse wastewater samples using strata-X cartridges. The extraction of antibiotics from water matrices was tested at several pH values. The best recoveries were obtained at pH 2. Depending on the nature of antibiotic, the limits of detection (LOD) and limits of quantification (LOQ) were in the range of 0.1–0.3 μg/L and 1.3–2.9 μg/L, respectively. The range of antibiotics detected in the wastewaters in effluents was 0.008 to 4.9 ng/L while in the influent, the range was 1 to 21 ng/L; thus higher concentrations were found in the influents as compared to effluents. This therefore confirmed the presence of these contaminants in the South African slaughterhouse wastewaters. The second phase entailed the investigation of the third objective which was to determine the possible mechanisms of removal of antibiotics from wastewaters using anaerobic digestion and to evaluate the biodegradation kinetics. A laboratory scale upflow anaerobic sludge blanket (UASB) reactor was employed to treat synthetic wastewater to explore the removal efficiencies of five veterinary antibiotics with an initial concentration of 50 µg/L. In a like manner, batch reactors were further used to evaluate the removal routes of the antibiotics. The UASB reactor was operated continuously under mesophilic conditions to evaluate its performance regarding the removal of organics; biogas production was also monitored. Organic loading rate (OLR) was varied from 8 to 9.2 kg.COD.m-3.d-1while keeping the hydraulic retention time (HRT) constant at 12 h. A chemical oxygen demand (COD) removal efficiency higher than 75% was achieved at an OLR of 9 kg.COD.m-3.d-1, with a HRT of 12 hours. About 80% of the antibiotics were removed during the continuous processes, however, a distinctive pattern of removal was not observed. The kinetic studies using a batch process showed that the removal route for the antibiotics was majorly adsorption to the sludge. Biodegradation occurred alongside adsorption but to a lesser degree. The kinetic data showed that the antibiotics degradation followed a first order kinetic model with half-lives that ranged from 6 to 77 days. Given the ineffectiveness of the biological process against the antibiotics, there was need to explore alternative wastewater treatment technologies. In this case adsorption and photocatalysis were investigated. Phase three presents the preparation and characterization of the integrated photocatalyst (IPCA). The adsorption properties of the IPCA, titanium dioxide (TiO2) and activated carbon (AC) were assessed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). These adsorbents were used to treat wastewater containing the target antibiotics. The effect of process variables such as adsorbent concentration, contaminant concentration and solution pH was investigated. The IPCA demonstrated good adsorption ability attaining removal efficiencies of over 50% while AC efficiency was over 60%. However, TiO2 demonstrated negligible adsorption performance. In the fourth phase, objective five was evaluated to determine the effectiveness of advanced oxidation processes (in this case photocatalysis) using IPCA and TiO2. The effect of process variables such as photocatalyst concentration and solution pH were investigated. It was found that photocatalysis attained almost 100% degradation of the target contaminants. Maximum removal efficiencies for both AC and IPCA were above 50% for an initial concentration of 100 mg/L. Adsorption using AC and IPCA followed the Langmuir and Freundlich isotherms, however, higher coefficients of correlation were obtained for the Langmuir isotherms for four of the antibiotics viz. AMO, CIP, ENRO and TET. The Freundlich model was the best fit for the SULFA in terms of the coefficient of correlation. With regards to the photodegradation, it was found that photocatalysis attained almost 100% degradation of the target contaminants. Complete degradation was achieved within half-lives of 60 to 102 minutes for all the compounds. Although both photocatalysts effectively degraded the contaminants, the IPCA had the unique advantages of possessing both adsorptive and photocatalytic properties. The activated carbon in the IPCA provided sites for the attachment of the antibiotics and TiO2 thus enhancing the photocatalytic performance. Apart from this, the IPCA can be easily recovered for reuse by decantation unlike the slurry TiO2. Therefore, the study demonstrated the effectiveness of the IPCA as a suitable photocatalytic material for the complete degradation of these antibiotics.Item Fouling control in a woven fibre microfiltration membrane for water treatment(Korean Society of Environmental Engineering, 2019-10-11) Chollom, Martha Noro; Rathilal, Sudesh; Pikwa, Kumnandi; May, LinghamKorean Society of Environmental Engineers. Current available commercial membranes are not robust and are therefore destroyed if left to dry out or handled roughly. Woven fibre microfiltration (WFMF) membranes have advantages over its competitors with respect to durability, thus, favourable for the developing economies and operation during rough conditions. Evaluation of the effects of aeration and brushing as a flux enhancement strategies for WFMF membrane was the purpose of this study. The WFMF membrane was found to be susceptible to pore plugging by colloidal material and adsorption/attachment by microbiological contaminants. This led to a 50% loss in flux. Aeration as a single flux enhancement strategy proved insufficient to maintain high flux successfully. Therefore combined flux enhancement strategies yielded the best results.Item Anaerobic treatment of slaugterhouse wastewater: evaluating operating conditions(WIT Press, 2019-12-11) Chollom, Martha Noro; Rathilal, Sudesh; Swalaha, Feroz Mahomed; Bakare, Babatunde F.; Tetteh, Emmanuel K.The aim of the study was to elucidate the effect of process parameters on the performance of an upflow anaerobic sludge blanket reactor (UASB) that was treating slaughterhouse wastewater. The UASB reactor was operated continuously under mesophilic conditions to evaluate its performance with respect to the removal of organics and, at the same time, monitor biogas production. Organic loading rate (OLR) was varied while keeping the hydraulic retention time (HRT) constant. Chemical oxygen demand (COD) removal efficiency higher than 75% was achieved at an OLR of 9 kg.COD.m-3.d-1, with a HRT of 12 h. Bulking sludge problems were not observed during the reactor operation period. Stability of the treatment process was achieved by the natural buffering of the system due to the produced alkalinity and also due to the characteristics of the wastewaters which was found to be rich in proteins and fatty acids.Item Fouling and cleaning in osmotically driven membranes(InTechOpen, 2018-03-06) Chollom, Martha Noro; Rathilal, SudeshFouling is a phenomenon that occurs in all membrane processes. It is a complex problem, which limits the full operation of this technology. Fouling in pressure-driven membranes (PDMs) has been studied extensively, and the occurrence is well understood in that methods of mitigation have been proposed; however, limitations still occur for their full implementation. The use of osmotically driven membranes (ODMs) for water treatment is an emerging technology, which has shown some advantages such as low hydraulic pressure operation, high solute rejection and high recovery over PDMs. However, like in PDMs, fouling still presents a challenge. This chapter is aimed at evaluating the impact of fouling on the ODM performance, exploring the factors and mechanisms governing the fouling behaviour, developing approaches for mitigating fouling, elucidating the effect of membrane fouling and providing mitigation strategies as well as the causes of fouling in ODMs.Item Fouling mitigation on a woven fibre microfiltration membrane for the treatment of raw water(Institution of Chemical Engineers, 2017-06) Chollom, Martha Noro; Pikwa, Kumnandi; Rathilal, Sudesh; Pillay, Visvanathan LingamurtiThe main source of drinking water in rural areas of South Africa is surface water. Improving drinking water and sanitation facilities alone does not completely solve the problem of waterborne diseases. A novel simple gravity driven filtration unit incorporated with the woven fibre microfiltration (WFMF) membranes was developed for the treatment of raw water for drinking purposes. However, these membranes are susceptible to fouling which reduces flux permeation. This paper focused on evaluating the fouling mitigation strategies to improve on performance of the woven fibre membrane filtration unit with respect to fouling and flux recovery. The study found that the WFMF membrane fouled both internally by pore plugging and externally by adsorption and deposition on the membrane. As a result, a single flux enhancement strategy proved insufficient to maintain high flux successfully. A combination of strategies gave the best optimum conditions for flux production. Backwashing with a combination of brushing yielded the highest recovery of 187%. Soaking the membranes in 0.2% hypochlorite for an hour and thereafter by brushing them yielded 93% flux recovery. Mechanical cleaning however yielded the best result with 97% flux recovery. It was concluded that the selected strategies were the most successful strategies to prevent a sharp decline in flux due to fouling and giving high average flux for the filtration period.Item The applicability of nanofiltration for the treatment and reuse of textile reactive dye effluent(AJOL, 2015) Chollom, Martha Noro; Rathilal, Sudesh; Pillay, Visvanathan Lingamurti; Alfa, DorcasThe main aim of the study was to test the feasibility of using nanofiltration (NF) processes for the treatment of reactive dye-bath effluents from the textile industry, in order to recover the water and chemicals (salts) for reuse purposes. The study of the reusability of nanofiltered water for dyeing has been given little or no attention. About 30% of reactive dyes remain unfixed on fibres; the unfixed dyes are responsible for the colouration in effluents. Membrane processes were employed to treat reactive dye-bath effluents to recover the salts and water. Investigations were conducted firstly with ultrafiltration (UF) used as a pre-treatment for NF. Secondly, evaluations were performed for 2 types of NF membranes (SR90 and NF90), in terms of quality of permeate produced and fluxes achieved for 2 different samples of effluent. The effect of cleaning on membrane performance was assessed. A reusability test was carried out on both permeate samples for dyeing light and dark shade recipes. The use of UF as pre-treatment to NF resulted in rejection of colloidal substances > 90% and a 15% flux improvement. Permeate from NF90 had a conductivity of 76 µS/cm and total organic carbon (TOC) of 20 mg/ℓ, as compared to SR90 which had a conductivity of 8.3 mS/cm and a TOC of 58 mg/ℓ. Light shade from NF90 gave satisfactory results on dyeing, with no colour difference. However a variation in colour was noticed when the medium sample was used to dye the light shade. Both NF permeates gave satisfactory results when used to dye the dark shades. Permeate from NF90 was within the accepted range for reuse, while permeate from SR90 had a higher salt recovery. Chemical cleaning resulted in 80% flux recovery. From the reusability test it was concluded that permeate from NF90 met the reuse criteria for feed water to the dye bath.Item Treatment and reuse of reactive dye effluent from textile industry using membrane technology(2014) Chollom, Martha Noro; Rathilal, Sudesh; Pillay, Visvanathan LingamurtiThe textile industry consumes large volumes of water and in turn produces substantial quantities of polluted effluents. Approximately 30% of reactive dyes used during the textile processing remain unfixed on fibres and are responsible for the colouration in effluents. Various conventional methods are being used to treat textile effluent. However, the disadvantage of these methods is that total colour removal is not achieved and chemical by-products are introduced from the use of chemicals. The water quality produced therefore does not meet the requirement for textile reuse. Membrane based processes provide interesting possibilities of separating hydrolysed dye stuff and dyeing auxiliaries, thereby reducing colouration and COD content. They can be employed to treat reactive dye bath effluent to recover the salts and water for the purpose of reuse. This study aimed at integrating membrane processes into the reactive dye bath of a textile industry. The objectives were to determine the quality of permeate produced in terms of removal of organics, ascertain its reusability for dyeing, investigate the production rate in terms of permeate fluxes and finally to investigate the cleanability and flux recovery of the membranes. Three effluent samples were chosen for this study based on the dyeing recipe; Light shade, Medium shade and Dark shade. Ultrafiltration (UF) and Nanofiltration (NF) membrane processes were employed to treat the reactive dye bath effluents to recover the salts and water. Investigations were conducted firstly with UF as a pre-treatment to NF. Secondly, evaluations were carried out on the performance of two types of NF membranes (SR90 and NF90) in terms of permeate quality and fluxes for the investigated samples. The effect of cleaning on membrane performance was done. A reusability test was carried out on the permeate samples for dyeing. It was found that the use of UF as a pre-treatment yielded an increase in permeate of 5–25% of the NF fluxes and 90% in organics reduction for all treated samples, hence increasing the water recovery. High rejection of ˃90% by NF90 for COD, TOC and colour were obtained for all the treated samples. SR90 rejection was 80–90% for colour and ˃90% for COD and TOC. Salt recovery for NF90 was 60–90% and for SR90 was 40–50%. The reusability tests carried out showed that permeate recycled from NF90 can be used for any section in the textile industry including the most critical such as dyeing on light shades, while that from SR90 can be used for dyeing dark shades only. It was then concluded that membrane based processes can be integrated into the dye bath of the textile process for the purpose of reuse, thereby saving on the cost of chemicals (salts), reducing fresh water usage and reducing the extent of final effluent treatment.