Repository logo
 

Faculty of Engineering and Built Environment

Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/9

Browse

Search Results

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Evaluating the performance of an eggshell-bagasse biosorption system in removing lead and cadmium from aqueous solutions
    (2021-02) Harripersadth, Charlene; Musonge, Paul; Isa, Yusuf Makarfi
    In this research investigation, the simultaneous use of 2 biomaterials, sugarcane bagasse and eggshells, were applied as biosorbents in the treatment of metal laden effluent. Under the characterisation measurements investigated, it was found that carbon, calcium and oxygen atoms which constitute carboxylic and carbonate functional groups were prominent in eggshells, whereas for bagasse, it was carbon, hydrogen and oxygen atoms constituting hydroxyl and carbonyl groups. Batch studies were conducted to investigate the effect of fundamental process variables such as particle size (75 – 250 μm), initial metal ion concentration (40 – 240 mg/L), pH (2 – 7) and contact time (0 – 120 min). With respect to the equilibrium studies, the applicability of the Langmuir isotherm implied a monolayer formation of metal ions onto the surface of both biomaterials with the maximum amounts of Pb and Cd adsorbed based on 1 g of biosorbent being 277.8 and 13.62 mg/g for eggshells and 31.45 and 19.49 mg/g for bagasse, respectively. Moreover, kinetic modelling revealed that the process was well described by the pseudo – second order model for both Pb and Cd using eggshells and bagasse. Fixed bed studies were used to assess the dynamic adsorption behaviour of the eggshell – bagasse system using a lab – scale adsorption column of 2.3 cm in diameter and 30 cm in height. The effect of bed depth (4 – 12 cm) on 5 adsorbents (eggshells, bagasse, adsorbent A, adsorbent B and adsorbent C) in the removal of Pb were investigated. Adsorbents A, B and C were a combination of both eggshells and bagasse with adsorbent A constituting 75wt % bagasse and 25wt % eggshells, adsorbent B constituting 50wt % bagasse and 50wt % eggshells and adsorbent C constituting 25wt % bagasse and 75wt % eggshells. The column experiments highlighted an improvement in bed performance with an increase in bed depth resulting in greater mass transfer zones, breakthrough times and larger quantities of effluents treated. Two kinetic models (Thomas and Yoon–Nelson) were used to interpret the breakthrough curves where the data showed good fits to both models used. In determining the efficacy of the eggshell – bagasse biosorption system, adsorbent C was found to be most proficient in the removal of Pb with eggshells, adsorbent B, adsorbent A and bagasse following suit. The results from this investigation strongly suggest the plausible reuse of agricultural waste materials in the treatment of contaminated effluent through the biosorption process.