Repository logo
 

Faculty of Engineering and Built Environment

Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/9

Browse

Author: search.filters.author.Buraimoh, ElutunjiStart date: 2021

Search Results

Now showing 1 - 8 of 8
  • Thumbnail Image
    Item
    Performance evaluation of percentage differential relays on power transformer and reliability assesment in HVDC grid protection scheme
    (IEEE, 2022-08-22) Ngema, Philani; Davidson, Innocent Ewaen; Buraimoh, Elutunji
    Percentage differential relays remain the most sensitive protection tool applied as backup protection on power transformers, busbar, and generators. Relays sometimes do mis-operate with the current transformer being affected by external fault leading to saturation, and the subsidence current present after clearing external faults. The cause of misoperation of percentage differential relays cannot be ignored that it entirely depends on magnitudes more than directionality for tripping decisions. This paper covers evaluating differential element performance, analysis of transformer inrush current, internal faults, external faults, and overexcitation conditions. The accurate computing of current transformers is also included. This protection only applies to 10MVA and above on transformers; however, it is not limited to transformers, but also transmission lines, busbars, and generators. The balance of the paper is on reliability assessment based on the HVDC grid protection scheme operation
  • Thumbnail Image
    Item
    Contactless palmprint recognition system : a survey
    (Institute of Electrical and Electronics Engineers (IEEE), 2022) Alausa, Dele W.S.; Adetiba, Emmanuel; Badejo, Joke A.; Davidson, Innocent E.; Obiyemi, Obiseye; Buraimoh, Elutunji; Abayomi, Abdultaofeek; Oshin, Oluwadamilola
    T Information systems in organizations traditionally require users to remember their secret pins (password), token, card number, or both to confirm their identities. However, the technological trend has been moving towards personal identification based on individual behavioural attributes (such as gaits, signature, and voice) or physiological (such as palmprint, fingerprint, face, iris, or ear). These attributes (biometrics) offer many advantages over knowledge and possession-based approaches. For example, palmprint images have rich, unique features for reliable human identification, and it has received significant attention due to their stability, reliability, uniqueness, and non-intrusiveness. This paper provides an overview and evaluation of contactless palmprint recognition system, the state-of-the-art performance of existing works, different types of "Region of Interest" (ROI) extraction algorithms, feature extraction, and matching algorithms. Finally, the findings obtained are presented and discussed
  • Thumbnail Image
    Item
    Advanced distributed cooperative secondary control of Islanded DC Microgrids
    (MDPI AG, 2022-05-28) Aluko, Anuoluwapo; Buraimoh, Elutunji; Oni, Oluwafemi Emmanuel; Davidson, Innocent Ewean
    In an islanded DC microgrid with multiple distributed generators (DGs), the droop control is employed to realize proportional current sharing among the DGs in the microgrid. The action of the droop control causes a deviation in the DC bus voltage which is exacerbated by the line impedance between the DG and the DC bus. In this paper, an advanced distributed secondary control scheme is proposed to simultaneously achieve accurate voltage regulation and cooperative current sharing in the islanded DC microgrid system. The proposed distributed secondary controller is introduced in the cyber layer of the system, and each controller shares information with neighbouring controllers via a communication network. The distributed technique maintains the reliability of the overall system if some part of the communication link fails. The proposed controller uses the type-II fuzzy logic scheme to adaptively select the secondary control parameters for an improved response of the controller. The sufficient conditions to guarantee the stability of the proposed controller are derived using the Lyapunov method. Comprehensive tests under different operating scenarios are conducted to demonstrate the robustness of the proposed control scheme.
  • Thumbnail Image
    Item
    Enhancing the performance of Eskom’s Cahora Bassa HVDC Scheme and Harmonic Distortion Minimization of LCC-HVDC Scheme using the VSC-HVDC link
    (MDPI AG, 2022-04-20) Davidson, Innocent Ewean; Oni, Oluwafemi Emmanuel; Aluko, Anuoluwapo; Buraimoh, Elutunji
    Cahora Bassa, a thyristor-based High Voltage Direct (HVDC) link, transmits 1920 MW of power from a hydro-power plant in Zambezi River, north of Mozambique, to Apollo Substation in Johannesburg, South Africa. The high degree of harmonics distortion that is transferred into the AC side of the transmission network and the continuous increase in the rate at which commutation failure occurs during systems disturbance are both flaws in the utilization of this HVDC converter technology. AC and DC filters with rugged controllers are often used to minimize this effect but are limited in scope. Modern converter technology, such as the Voltage Source Converter (VSC), was proposed in this study to reduce harmonics content level, increase power transfer capabilities, enhance network stability, and reduce the rate of commutation failure occurrence. This paper, therefore, evaluates the performance analysis of the Cahora Bassa HVDC link and its level of harmonic distortion in the line commutated converters. A proposed method of utilizing VSC HVDC is provided as a suitable solution using three modular-level voltage source converter technology. Current and voltage waveform characteristics during a three-phase short circuits fault were analyzed, and the latest developments in the area of VSC HVDC were discussed. The results show a lower total harmonics distortion with the usage of VSC HVDC converter technology at the inverter station. The continuous occurrence of commutation failure was minimized by implementing a new converter architecture. The network simulation and analysis were carried out using the DIgSILENT PowerFactory engineering software tool.
  • Thumbnail Image
    Item
    Modeling of double stage photovoltaic inverter system with fast delayed signal cancellation for fault ride-through control application in microgrids
    (MDPI AG, 2022-02) Buraimoh, Elutunji; Davidson, Innocent E.
    This research presents a secondary control for a grid-supporting microgrid with photovoltaics sources to guarantee grid code compliance and ancillary services. The secondary control accomplishes the fault ride-through, which implements a delayed signal cancellation (DSC) algorithm for negative sequence detection. Without mode switching, the proposed control strategy meets grid code requirements and ensures voltage regulation at the secondary level, which is active and more salient throughout the transient period of host grid disturbances. This control also ensures a constant supply of the microgrid’s sensitive local load while adhering to grid code requirements. Similarly, active power injection into the main grid is limited by progressively altering the MPPT operating point dependent on the depth of voltage sag to optimize reactive power injection to sustain grid voltage sag. The recommended secondary control is triggered by utilizing the DSC process’s detection algorithm to identify the occurrence of a fault in a tiny fraction of a half-cycle in a grid fault. Consequently, while satisfying microgrid load needs, the devised technique guaranteed that increases in DC-link voltage and AC grid current were controlled. MATLAB Simscape ElectricalTM and OPAL-RT Lab are used to do time-domain simulations of the model using the recommended secondary control systems.
  • Thumbnail Image
    Item
    A new technique for improvement differential relay performance in power transformers
    (IEEE, 2022-01-25) Ngema, Philani; Buraimoh, Elutunji; Davidson, Innocent
    Transformer protection devices are often used to identify internal or external transformer problems and act to either prevent damage or unnecessarily disconnect power transformers. This study proposes a new differential element that combines harmonic restraint, security, and reliability with harmonic blocking speed to improve the relay performance in a power transformer. Under high load, a negative-sequence differential element adds more sensitivity for internal turn-to-turn failures. External fault detection monitoring enhances security in an external problem involving current transformer (CT) saturation. Furthermore, overcurrent elements may be configured to vary dynamically in operation is provided. This element enhances protection coordination for various operating conditions without requiring modifications to the transformer group settings. The balance of the paper discusses the use of an under-load tap changer using a time-synchronized phasor monitoring system to reduce loop current and losses in parallel transformer applications.
  • Thumbnail Image
    Item
    Decentralized fast delayed signal cancelation secondary control for low voltage ride-through application in grid supporting grid feeding microgrid
    (Frontiers Media SA, 2021-04-15) Buraimoh, Elutunji; Davidson, Innocent E.; Martinez-Rodrigo, Fernando
    In this study, a distributed secondary control is proposed alongside the conventional primary control to form a hierarchical control scheme for the Low Voltage Ride-Through (LVRT) control and applications in the inverter-based microgrid. The secondary control utilizes a fast Delayed Signal Cancelation (DSC) algorithm for the secondary control loop to control the reactive and active power reference by controlling the sequences generated. The microgrid consists of four Distributed Energy Resources (DER) sources interfaced to the grid through interfacing inverters coordinated by droop for effective power-sharing according to capacities. The droop also allows for grid supporting application for microgrid’s participation in frequency and voltage regulation in the main grid. The proposed decentralized fast DSC performance is evaluated with centralized secondary and traditional primary control using OPAL-RT Lab computation and MATLAB/SIMULINK graphical user interface for offline simulations and real-time digital simulator verification. This study presents and discusses the results.
  • Thumbnail Image
    Item
    Modelling and fault ride-through control of grid supporting inverter-based microgrid
    (2021-03-02) Buraimoh, Elutunji; Davidson, Innocent Ewaen
    This thesis is focused on modeling and fault ride-through control, local load power delivery, and grid power exchange of power electronic interfaced Distributed Energy Resources (DERs) for grid supporting microgrids. Active and reactive power regulations are the requirements for a grid-supporting system operating as a current source, while frequency and voltage magnitude regulation in the grid-supporting system acting as a voltage source. Consequently, these are put into consideration as the primary control requirements for the inverter-based microgrid. To that end, two discrete-time models of a grid-feeding system and grid-forming system were developed to serve as controls for a single DER operating in grid-connected mode and islanded mode, respectively. Consequently, for the first set of mathematical models: grid feeding and grid forming were interfaced with a droop control to allow for parallel operation of additional DERs for power coordination within the microgrid for grid-connected and islanded operation. However, virtual impedance was incorporated into the grid-supporting system's droop control operating as a voltage source to emulate the link feeder's physical impedance to the main grid. Based on the developed grid supporting models, the microgrid primary control schemes effectively delivered power to the host grid and simultaneously contributed to the grid's frequency and voltage regulation. Furthermore, to ensure grid code compliance and ensure the microgrid provides ancillary services to the host grid, such as fault ride-through and reactive power compensation for voltage recovery, a novel technique is proposed in the microgrid's secondary control. The secondary control realizes the fault ride-through for the grid supporting system using a delay signal cancellation algorithm for negative sequence detection. The proposed control scheme actualizes grid code requirements by providing a secondary voltage control, which is active and more prominent in the transient period of faults without mode switching. The strategy's performance is further enhanced with an IGBT-Diodes switched AC reactor to improve the voltage and prevent the transient overcurrent in the microgrid during the grid fault. This ensures a continued supply of the microgrid's local sensitive load while meeting the grid code requirement. Similarly, the active power injection into the main grid is limited to maximize reactive power injection into the main network to support the grid voltage sag. The detection algorithm using the delayed signal cancellation algorithm is implemented to detect the instance of fault in 1.6% of the half-cycle under grid disturbance/fault to activate the proposed secondary control. This effectiveness and fault ride-through compliance of the developed control models were tested on an inverter-based microgrid system with an ideal voltage source DERs. Finally, to accommodate for the grid dynamics introduced to the DC link parameters of an ideal voltage source DER such as PV, the models were also implemented and assimilated for a solar PV sourced DER used with a grid supporting inverter-based microgrid. The injection of active power into the main grid is constrained by systematically shifting the MPPT operating point based on voltage sag depth to maximize reactive power injection to support the grid voltage sag. The strategy developed in the PV sourced system also ensured that the DC-link voltage and AC grid current raises are suppressed while meeting microgrid load requirements. The models' implementation, DER primary control, and proposed secondary control schemes are established through detailed time-domain simulation studies using MATLAB Simscape Electrical™ and Control System™.