Repository logo
 

Faculty of Applied Sciences

Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/5

Browse

Author: search.filters.author.Redhi, Gan G.Subject: search.filters.subject.Density

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Influence of epoxy group in 2-pyrrolidonium ionic liquid interactions and thermo-physical properties with Ethanoic or Propanoic acid at various temperatures
    (ACS Publications, 2016) Vasanthakumar, Arumugam; Redhi, Gan G.; Gengan, Robert Moonsamy
    In this present study, the interaction between a carboxylic acid and ionic liquids, in terms of their binary mixtures and corresponding thermo-physical properties, was investigated. Here, the novel ionic liquid (IL) [EPMpyr]+[Cl]− was synthesized, and it has been mixed with ethanoic or propanoic acids. The influence of the epoxy group in this ionic liquid was more strongly affected with the acids, and their physicochemical properties at varied temperatures are discussed in term of density (ρ), viscosity (η), speed of sound (u), and refractive index (n) measurements. The density (ρ), speed of sound (u), viscosity (η), and refractive index (n) of the IL, ethanoic acid, propanoic acid, and their corresponding binary mixtures {[([EPMpyr]+[Cl]− (1) + ethanoic or propanoic acid (2)} have been measured at T = (293.15–313.15) K and at P = 0.1 MPa. The theoretical thermodynamic properties of excess molar volumes (VmE), isentropic compressibility (ks), deviation in isentropic compressibility (Δks), and intermolecular free length (Lf) are calculated using experimental density and speed of sound data. The VmE and Δks values for both binary mixtures were found to be negative over the entire mole fraction range of composition at all the investigated temperatures. These results suggest the existence of specific interactions between components in the molecules. The experimental data could be helpful to understand the molecular interactions between the IL and carboxylic acid combinations. The experimental data were fitted to the Redlich–Kister polynomial equation.
  • Thumbnail Image
    Item
    Synthesis and characterization of 2′,3′-epoxy propyl-N-methyl-2-oxopyrrolidinium salicylate ionic liquid and study of its interaction with water or methanol
    (Royal Society of Chemistry, 2016) Vasanthakumar, Arumugam; Bahadur, Indra; Redhi, Gan G.; Gengan, Robert Moonsamy
    Important physico-chemical properties of ionic liquids (ILs) can be manipulated by adjusting the nature of the cation or anion. These properties are exploited in applications such as organic synthesis, catalysis and electrochemical processes to mention a few. In this work, the novel pyrrolidone ionic liquid N-(2′,3′-epoxypropyl)-N-methyl-2-oxopyrrolidinium salicylate [EPMpyr]+[SAL]− was synthesized using two steps and characterized. The temperature dependent density and speed of sound for ionic liquid, methanol, water, and their corresponding binary mixtures of {IL (1) + methanol or water (2)} were measured over the entire range of mole fractions at temperatures from T = (293.15 to 313.15) K in steps of 5 K, under atmospheric pressure. The calculated thermodynamic properties such as excess molar volume VEm, isentropic compressibility ks, intermolecular free length Lf, and deviation in isentropic compressibility Δks, were derived from the investigated density and speed of sound data. The resulting experimental data for excess molar volumes VEm, intermolecular free length Lf, and deviation in isentropic compressibility Δks, were well fitted to the Redlich–Kister polynomial equation. The effect of temperature and concentration on thermophysical properties was also provided.
  • No Thumbnail Available
    Item
    Synthesis, characterization and thermophysical properties of ionic liquid N-methyl-N-(2′,3′-epoxypropyl)-2-oxopyrrolidinium chloride and its binary mixtures with water or ethanol at different temperatures
    (Elsevier, 2016) Vasanthakumar, Arumugam; Bahadur, Indra; Redhi, Gan G.; Gengan, Robert Moonsamy; Anand, Krishnan
    A novel ionic liquid, namely, N-methyl-N-(2′,3′-epoxypropyl)-2-oxopyrrolidiniumchloride [Epmpyr]+[Cl]− was synthesized and characterized by different techniques such as NMR (1H and 13C), FTIR, and elemental analysis. The water content of the ionic liquid was checked by Karl Fisher titration. Further, the density, ρ, and speed of sound, u, were measured for the above ionic liquid and the corresponding binary systems with water or ethanol at different temperatures ranging from (293.15 to 313.15) K. The derived thermodynamic properties for instance excess molar volumes, VE m isentropic compressibility, κs, and deviation in isentropic compressibility, Δκs, were investigated from the density and speed of sound data, respectively. It is noted that density and speed of sound of the ionic liquid and its binary mixtures were decreased with increase in temperature, whereas excess molar volume, isentropic compressibility, and deviation in isentropic compressibility values increased. Derived properties such as excess molar volumes, and deviation in isentropic compressibility data were fitted to the Redlich-Kister polynomial equation. The measured and calculated data were interpreted in terms of intermolecular interfaces and structural effects between similar and dissimilar molecules upon mixing.
  • No Thumbnail Available
    Item
    Influence of the alkyl group on thermophysical properties of carboxylic acids in 1-butyl-3-methylimidazolium thiocyanate ionic liquid at various temperatures
    (Elsevier, 2015) Redhi, Gan G.; Ebenso, Eno E.; Singh, Suren; Bahadur, Indra; Ramjugernath, Deresh
    In the present study, influence of the alkyl group and temperature on the interactions between the carboxylic acid and ionic liquid (IL) mixtures were discussed in term of density and sound velocity measurements. The IL used in this study was 1-butyl-3-methylimidazolium thiocyanate ([BMIM]+[SCN]−). The density (ρ), and sound velocity (u), of the IL, acetic acid, propionic acid, and their corresponding binary systems {[BMIM]+[SCN]− (x1) + acetic or propionic acid (x2)} have been measured at T = (293.15, 298.15, 303.15, 308.15 and 313.15) K and at p = 0.1 MPa. The excess molar volumes, View the MathML sourceVmE, isentropic compressibility, κs, and deviation in isentropic compressibility, Δκs, were calculated using experimental density and sound velocity data, respectively. The Redlich–Kister polynomial equation was used to fit the excess/deviation properties. These results are useful for describing the intermolecular interactions that exist between the IL and carboxylic acid mixtures.
  • No Thumbnail Available
    Item
    Density and speed of sound of 1-ethyl-3-methylimidazolium ethyl sulphate with acetic or propionic acid at different temperatures
    (Elsevier, 2014-11) Singh, Sangeeta; Bahadur, Indra; Redhi, Gan G.; Ramjugernath, Deresh; Ebenso, Eno, E.
    In this work, new density, ρ, and speed of sound, u, were measured for IL, acetic acid, propionic acid, and their binary systems {IL (x1) + acetic or propionic acid (x2)} at 293.15, 298.15, 303.15, 308.15 and 313.15 K under at-mospheric pressure. The IL used in this study was 1-ethyl-3-methylimidazolium ethyl sulphate ([EMIM]+[EtSO4]−). The derived properties such as excess molar volumes, Vm, isentropic compressibility, κs, and deviation in isentropic compressibility, Δκs, were calculated using experimental density and speed of sound data, respectively. Derived properties such as excess molar volumes, Vm, and deviation in isentropic com-pressibility, Δκs, data were fitted to the Redlich–Kister polynomial equation. The measured and calculated data were interpreted on the basis of intermolecular interactions and structural effects between like and unlike mol-ecules upon mixing.