Faculty of Applied Sciences
Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/5
Browse
4 results
Search Results
Item Correlation and prediction of the physical and excess properties of the ionic liquid 1-butyl-3-methylimidazolium methyl sulphate with several alcohols at T= (298.15 to 313.15) K(2013-07-30) Singh, Sangeeta; Deenadayalu, NirmalaThe thermodynamic properties of binary liquid mixtures using an ionic liquid (IL) with alcohols were determined at different temperatures. The ionic liquid used was 1-butyl-3- methylimidazolium methylsulphate [BMIM]+[MeSO4]-. Densities, speed of sound, and refractive indices for the binary mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol) were experimentally measured over the whole range of composition at T = (298.15, E 303.15, 308.15, and 313.15) K. From the experimental data, excess molar volumes, V m , E , deviations in refractive isentropic compressibilities, κ s , excess isentropic compressibilities, κ S indices, ∆n, and molar refractions, R, were calculated. The excess partial molar volumes were also calculated at T = 298.15 K. For the binary systems, ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or E E E 1-butanol) V m and κ S are always negative and V m decrease slightly when the temperature increases. The refractive index deviation at T = (298.15, 303.15, 308.15, and 313.15) K is positive over the whole composition range. The measured negative values for excess molar volume of these mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol) indicate strong ion-dipole interactions and packing between alcohols and IL are present. The Redlich-Kister smoothing polynomial equation was satisfactorily applied for the E E fitting of the V m , κ S , and ∆n data to give the fitting parameters and the root-mean-square deviations. The Lorentz-Lorenz (L-L) equation was also used to correlate the volumetric property and predict the density or refractive index of the binary mixtures of ionic liquid and the organic solvents. The Lorentz-Lorenz approximation gives a higher σ when used to correlate the iiiexcess molar volumes for the mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol). The L-L equation gives good results for the prediction of density and refractive index. The results are discussed in terms of solute-solute, solute-solvent and solvent- solvent interactions.Item Densities, speeds of sound, and refractive indices for binary mixtures of 1-butyl-3-methylimidazolium methyl sulphate ionic liquid with alcohols at T = (298.15, 303.15, 308.15, and 313.15) K(Elsevier, 2012-09-24) Singh, Sangeeta; Aznar, Martin; Deenadayalu, NirmalaExperimental densities, speeds of sound, and refractive indices of the binary mixtures {1-butyl-3-methylimidazolium methylsulphate ([BMIM]+[MeSO4]−) + methanol, or 1-propanol, or 2-propanol, or 1-butanol} were measured over the whole range of composition at T = (298.15, 303.15, 308.15, and 313.15) K. From the experimental data, excess molar volumes, excess isentropic compressibilities, deviation in refractive indices and molar refractions were calculated. The excess molar volumes, change in isentropic compressibilities, and deviation in refractive indices were fitted by the Redlich–Kister smoothing polynomial. The Lorentz–Lorenz equation was applied to correlate the volumetric properties and predict the density or the refractive index of the binary mixtures. Results for these quantities have been discussed in terms of intermolecular interactions between the components of the mixtures. For all the systems studied, the excess molar volume and excess isentropic compressibility are negative, while the change in refractive index on mixing is always positive over the entire composition range and at all temperatures.Item Excess molar volume and isentropic compressibility for binary or ternary ionic liquid systems(2010) Bahadur, Indra; Deenadayalu, NirmalaThe thermodynamic properties of mixtures involving ionic liquids (ILs) with alcohols or alkyl acetate or nitromethane at different temperatures were determined. The ILs used were methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]+[Tf2N]-) and 1-butyl-3- methylimidazolium methyl sulphate [BMIM]+[MeSO4]-. The ternary excess molar volumes (�������� E ) for the mixtures {methyl trioctylammonium bis (trifluoromethylsulfonyl)imide + methanol or ethanol + methyl acetate or ethyl acetate}and (1-butyl-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol + nitromethane) were calculated from experimental density values, at T = (298.15, 303.15 and 313.15) K and T = 298.15, respectively. The Cibulka equation was used to correlate the ternary excess molar volume data using binary data from literature. The �������� E values for both IL ternary systems were negative at each temperature. The negative contribution of �������� E values are due to the packing effect and/or strong intermolecular interactions (ion-dipole) between the different molecules. The density and speed of sound of the binary solutions ([MOA]+[Tf2N]- + methyl acetate or ethyl acetate or methanol or ethanol), (methanol + methyl acetate or ethyl acetate) and (ethanol + methyl acetate or ethyl acetate) were also measured at T = ( 298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. The apparent molar volume, Vφ , and the apparent molar isentropic compressibility, κφ , were evaluated from the experimental density and speed of sound data. A Redlich-Mayer type equation was fitted to the apparent molar volume and apparent molar isentropic compressibility data. The results are discussed in terms of solute-solute, solute- solvent and solvent-solvent interactions. The apparent molar volume and apparent molar isentropic compressibility at infinite dilution, ��φ �� and κφ ��, respectively of the binary solutions have been calculated at each temperature. The ��φ �� values for the binary v systems ([MOA]+[Tf2N]- + methyl acetate or ethyl acetate or methanol or ethanol) and (methanol + methyl acetate or ethyl acetate) and (ethanol + methyl acetate or ethyl acetate) are positive and increase with an increase in temperature. For the (methanol + methyl acetate or ethyl acetate) systems ��φ �� values indicate that the (ion-solvent) interactions are weaker. The κφ �� is both positive and negative. Positive κφ ��, for ([MOA] + [Tf2N]- + ethyl acetate or ethanol), (methanol + ethyl acetate) and (ethanol + methyl acetate or ethyl acetate) can be attributed to the predominance of solvent intrinsic compressibility effect over the effect of penetration of ions of IL or methanol or ethanol. The positive κφ �� values can be interpreted in terms of increase in the compressibility of the solution compared to the pure solvent methyl acetate or ethyl acetate or ethanol. The κφ �� values increase with an increase in temperature. Negative κφ ��, for ([MOA] + [Tf2N]- + methyl acetate or methanol), and (methanol + methyl acetate) can be attributed to the predominance of penetration effect of solvent molecules into the intra-ionic free space of IL or methanol molecules over the effect of their solvent intrinsic compressibility. Negative κφ �� indicate that the solvent surrounding the IL or methanol would present greater resistance to compression than the bulk solvent. The φ �� values decrease with an increase in the temperature. The infinite dilution apparent molar expansibility, ��φ �� , values for the binary systems (IL + methyl acetate or ethyl acetate or methanol or ethanol) and (methanol + methyl acetate or ethyl acetate) and (ethanol + methyl acetate or ethyl acetate) are positive and decrease with an increase in temperature due to the solution volume increasing less rapidly than the pure solvent. For (IL + methyl acetate or ethyl acetate or methanol or ethanol) systems ��φ �� indicates that the interaction between (IL + methyl acetate) is stronger than that of the (IL + ethanol) or (IL + methanol) or (IL + ethyl acetate) solution. For the (methanol + methyl acetate or ethyl acetate) systems ��φ �� values vi indicate that the interactions are stronger than (ethanol + methyl acetate or ethyl acetate) systems.Item Excess molar volumes, partial molar volumes and isentropic compressibilities of binary systems (ionic liquid + alkanol)(2009) Sibiya, Precious N.; Deenadayalu, NirmalaThe thermodynamic properties of binary liquid mixtures involving ionic liquids (ILs) with alcohols were determined. ILs are an important class of solvents since they are being investigated as environmentally benign solvents, because of their negligible vapour pressure, and as potential replacement solvents for volatile organic compounds (VOCs) currently used in industries. Alcohols were chosen for this study because they have hydrogen bonding and their interaction with ILs will help in understanding the intermolecular interactions. Also, their thermodynamic properties are used for the development of specific chemical processes. The excess molar volumes of binary mixtures of {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from experimental density values, at T = (298.15, 303.15 and 313.15) K. The Redlich-Kister smoothing polynomial was fitted to the excess molar volume data. The partial molar volumes of the binary mixtures {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from the Redlich-Kister coefficients, at T = (298.15, 303.15 and 313.15) K. This information was used to better understand the intermolecular interactions with each solvent at infinite dilution. iii The isentropic compressibility of {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, were calculated from the speed of sound data at T = 298.15 K.