Faculty of Applied Sciences
Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/5
Browse
3 results
Search Results
Item Phase equilibrium studies of sulfolane mixtures containing carboxylic acids(2012-08-20) Sithole, Nompumelelo Pretty; Redhi, Gyanasivan GovindsamyIn this work, the thermodynamics of ternary liquid mixtures involving carboxylic acids with sulfolane, hydrocarbons including cycloalkane, and alcohols are presented. In South Africa, Sasol is one of the leading companies that produce synthesis gas from low grade coal. Carboxylic acids together with many other oxygenate and hydrocarbons are produced by Sasol using the Fischer-Tropsch process. Carboxylic acids class is one of the important classes of compounds with great number of industrial uses and applications. The efficient separation of carboxylic acids from hydrocarbons and alcohols from hydrocarbons is of economic importance in the chemical industry, and many solvents have been tried and tested to improve such recovery. This work focussed on the use of the polar solvent sulfolane in the effective separation by solvent extraction and not by more common energy intensive method of distillation. The first part of the experimental work focussed on ternary liquid-liquid equilibria of mixtures of [sulfolane (1) + carboxylic acid (2) + heptane (3) or cyclohexane or dodecane] at T = 303.15 K, [sulfolane (1) + alcohol (2) + heptane (3)] at T = 303.15 K. Carboxylic acid refers to acetic acid, propanoic acid, butanoic acid, 2- methylpropanoic acid, pentanoic acid and 3-methylbutanoic acid. Alcohol refers to methanol, ethanol, 1- propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1- propanol and 2-methyl-2-propanol. Ternary liquid- liquid equilibrium data are essential for the design and selection of solvents used from liquid- liquid extraction process. The separation of carboxylic acids from hydrocarbons and the alcohols from hydrocarbons is commercially lucrative consideration and is an important reason of this study. The separation of carboxylic acids or alcohols from hydrocarbons by extraction with sulfolane was found to be feasible as all selectivity values obtained are greater than 1. The modified Hlavatý, beta (β) and log equations were fitted to the experimental binodal data measured in this work. Hlavatý gave the best overall fit as compared to beta ( ) and log function. The NRTL (Non-Random, Two Liquid) and UNIQUAC Universal Quasichemical) model were used to correlate the experimental tie-lines and calculate the phase compositions of the ternary systems. The correlation work served three purposes: to summarise experimental data to test theories of liquid mixtures prediction of related thermodynamics properties. The final part of the study was devoted to the determination of the excess molar volumes of mixtures of [sulfolane (1) + alcohol (2)] at T = 298.15 K, T = 303.15 K and T = 309.15 K. Density was used to determine the excess molar volumes of the mixtures of [sulfolane (1) + alcohols (2)]. Alcohol refers to methanol, ethanol, 1- propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1-propanol, 2-methyl-2- propanol. The work was done to investigate the effect of temperature on excess molar volumes of binary mixtures of alcohols and sulfolane, as well as to get some idea of interactions involved between an alcohol and sulfolane. The excess molar volume data for each binary mixture was fitted in the Redlich–Kister equation to correlate the composition dependence of the excess property.Item Phase equilibrium studies of sulfolane mixtures containing carboxylic acids(2012) Sithole, Nompumelelo Pretty; Redhi, Gyanasivan GovindsamyIn this work, the thermodynamics of ternary liquid mixtures involving carboxylic acids with sulfolane, hydrocarbons including cycloalkane, and alcohols are presented. In South Africa, Sasol is one of the leading companies that produce synthesis gas from low grade coal. Carboxylic acids together with many other oxygenate and hydrocarbons are produced by Sasol using the Fischer-Tropsch process. Carboxylic acids class is one of the important classes of compounds with great number of industrial uses and applications. The efficient separation of carboxylic acids from hydrocarbons and alcohols from hydrocarbons is of economic importance in the chemical industry, and many solvents have been tried and tested to improve such recovery. This work focussed on the use of the polar solvent sulfolane in the effective separation by solvent extraction and not by more common energy intensive method of distillation. The first part of the experimental work focussed on ternary liquid-liquid equilibria of mixtures of [sulfolane (1) + carboxylic acid (2) + heptane (3) or cyclohexane or dodecane] at T = 303.15 K, [sulfolane (1) + alcohol (2) + heptane (3)] at T = 303.15 K. Carboxylic acid refers to acetic acid, propanoic acid, butanoic acid, 2-methylpropanoic acid, pentanoic acid and 3-methylbutanoic acid. Alcohol refers to methanol, ethanol, 1- propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1-propanol and 2-methyl-2-propanol. Ternary liquid- liquid equilibrium data are essential for the design and selection of solvents used from liquid- liquid extraction process. Abstract vi The separation of carboxylic acids from hydrocarbons and the alcohols from hydrocarbons is commercially lucrative consideration and is an important reason of this study. The separation of carboxylic acids or alcohols from hydrocarbons by extraction with sulfolane was found to be feasible as all selectivity values obtained are greater than 1. The modified Hlavatý, beta (β) and log equations were fitted to the experimental binodal data measured in this work. Hlavatý gave the best overall fit as compared to beta ( ) and log function. The NRTL (Non-Random, Two Liquid) and UNIQUAC Universal Quasichemical) model were used to correlate the experimental tie-lines and calculate the phase compositions of the ternary systems. The correlation work served three purposes: to summarise experimental data to test theories of liquid mixtures prediction of related thermodynamics properties. The final part of the study was devoted to the determination of the excess molar volumes of mixtures of [sulfolane (1) + alcohol (2)] at T = 298.15 K, T = 303.15 K and T = 309.15 K. Density was used to determine the excess molar volumes of the mixtures of [sulfolane (1) + alcohols (2)]. Alcohol refers to methanol, ethanol, 1- propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1-propanol, 2-methyl-2-propanol. The work was done to investigate the effect of temperature on excess molar volumes of binary mixtures of alcohols and sulfolane, as well as to get some idea of interactions involved between an alcohol and sulfolane. The excess molar volume data for each binary mixture was fitted in the Redlich–Kister equation to correlate the composition dependence of the excess property.Item Liquid-liquid equilibria related to the separation of organic acids(2012) Xhakaza, Nokukhanya Mavis; Redhi, Gyanasivan GovindsamyThe thesis involves a study of the thermodynamics of ternary liquid mixtures involving carboxylic acids with sulfolane, hydrocarbons and acetonitrile. Carboxylic acids are an important group of polar compounds with many industrial and commercial uses and applications. In South Africa, these carboxylic acids together with many other oxygenates and hydrocarbons are manufactured by SASOL using the Fischer–Tropsch process. The separation of these acids from hydrocarbons is a commercially viable option, and is an important reason for this study. This work focuses on the use of sulfolane in effecting separation by solvent extraction and not by the more common and energy intensive method of distillation. Sulfolane was chosen because of its high polarity and good solvent extraction properties. The first part of this study involves the determination of excess molar volumes (VmE) of binary mixtures of sulfolane (1) + carboxylic acids (2) at different temperatures of 303.15 K and 308.15 K, where carboxylic acids refer to acetic acid, propanoic acid, butanoic acid, 2-methylpropanoic acid, pentanoic acid and 3-methylbutanoic acid respectively. The densities of the binary systems of sulfolane (1) + carboxylic acids (2) were measured at T = 303.15 K and 308.15 K. The excess molar volumes were calculated from the experimental densities at each temperature. The VmE were negative for the entire mole fractions for all the binary systems. It was found that the VmE in the systems studied increase with an increase in temperature, and also VmE decreases with an increase in the carbon chain length of the carboxylic acid. The VmE data results were correlated using Redlich-Kister equation. The second part was the study of the binodal or solubility curves and tie line data for the ternary systems of [sulfolane (1) + carboxylic acids (2) + hydrocarbons (3)] and [acetonitrile (1) + carboxylic acids (2) + hydrocarbon (3)]. Hydrocarbons refer to pentane, hexane, dodecane and hexadecane. The binodal curve experimental data was determined by the cloud point technique. Liquid-liquid equilibrium (LLE) phase diagrams were constructed using the mole fractions and refractive indices (nD). Tie line data were obtained for the sulfolane-rich and hydrocarbon-rich phases as well as the acetonitrile-rich and hydrocarbon-rich phases respectively. The tie lines in both cases were skewed towards the hydrocarbon-rich phases indicating that relative mutual solubility of carboxylic acids is higher in the hydrocarbon-rich phase than in the solvent-rich phase. Selectivity values were calculated from the tie-lines to determine the extraction capabilities of solvents sulfolane and acetonitrile. Selectivity values in all cases were greater than one, meaning that both sulfolane and acetonitrile can be used to separate carboxylic acids from hydrocarbons. Binodal curve data were correlated by the Hlavatý, beta and log equations; average standard deviation error for Hlavatý was 0.012, for beta, 0.023 and for log, 0.021. The NRTL and UNIQUAC models were used to correlate the experimental tie-lines. The calculated values based on the NRTL equation were found to be better than those based on UNIQUAC equation; the average root-mean square deviation, (rmsd), between the phase composition obtained from experiment and that from calculation was 0.061 for the NRTL model, as compared to 0.358 for UNIQUAC model for the ternary systems involving sulfolane. For ternary systems of acetonitrile, the NRTL equation was better than the UNIQUAC with the rsmd of 0.003 and 0.287for UNIQUAC equation.