Research Institutes
Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/840
Browse
22 results
Search Results
Item Phenotypic and genotypic characterisation of an unique indigenous hypersaline unicellular cyanobacterium, Euhalothece sp.nov(Elsevier, 2018) Mogany, Trisha; Swalaha, Feroz Mahomed; Allam, Mushal; Mtshali, Phillip Senzo; Ismail, Arshad; Kumari, Sheena K.; Bux, FaizalA novel halotolerant species of cyanobacterium of the order Chroococcales was isolated from hypersaline estuary in Kwa-Zulu Natal, South Africa. A comprehensive polyphasic approach viz., cell morphology, pigment com-position and complete genome sequence analysis was conducted to elucidate the taxonomic position of the isolated strain. The blue-green oval to rod-shaped cells were 14–18 μm in size, and contained a high amount of phycocyanin pigments. The strain was moderate thermotolerant/alkalitolerant halophile with the optimum conditions for growth at 35 °C, pH 8.5 and 120 g/l of NaCl. Based on 16S rRNA gene sequence phylogeny, the strain was related to members of the ‘Euhalothece’ subcluster (99%). The whole genome sequence was de-termined, and the annotated genes showed a 90% sequence similarity to the gas-vacuolate, spindle-shaped Dactylococcopsis salina PCC 8305. The size of the genome was determined to be 5,113,178 bp and contained 4332 protein-coding genes and 69 RNA genes with a G + C content of 46.7%. Genes encoding osmoregulation, oxi-dative stress, heat shock, persister cells, and UV-absorbing secondary metabolites, among others, were identified. Based on the phylogenetic analysis of the 16S rRNA gene sequences, physiological data, pigment compositions and genomic data, the strain is considered to represent a novel species of Euhalothece.Item Characterization of brewery wastewater composition(WASET, 2015) Enitan, Abimbola Motunrayo; Adeyemo, Josiah; Kumari, Sheena K.; Swalaha, Feroz Mahomed; Bux, FaizalIndustries produce millions of cubic meters of effluent every year and the wastewater produced may be released into the surrounding water bodies, treated on-site or at municipal treatment plants. The determination of organic matter in the wastewater generated is very important to avoid any negative effect on the aquatic ecosystem. The scope of the present work is to assess the physicochemical composition of the wastewater produced from one of the brewery industry in South Africa. This is to estimate the environmental impact of its discharge into the receiving water bodies or the municipal treatment plant. The parameters monitored for the quantitative analysis of brewery wastewater include biological oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids, volatile suspended solids, ammonia, total oxidized nitrogen, nitrate, nitrite, phosphorus and alkalinity content. In average, the COD concentration of the brewery effluent was 5340.97 mg/l with average pH values of 4.0 to 6.7. The BOD5 and the solids content of the wastewater from the brewery industry were high. This means that the effluent is very rich in organic content and its discharge into the water bodies or the municipal treatment plant could cause environmental pollution or damage the treatment plant. In addition, there were variations in the wastewater composition throughout the monitoring period. This might be as a result of different activities that take place during the production process, as well as the effects of peak period of beer production on the water usage.Item Synthesis and performance evaluation of a new polymeric composite for the treatment of textile wastewater(ACS Publications, 2015) Gupta, Sanjay Kumar; Nayunigari, Mithil Kumar; Misra, Rohit; Ansari, Faiz Ahmad; Dionysiou, Dionysios (Dion) D.; Maity, Arjun; Bux, FaizalAzo dyes are synthetic colorants widely used in textile industry and are considered to be major contaminants in dye wastewater. Coagulation−flocculation is most preferred techniques to treat dye wastewater. A N,N-diisopropylamine-based new polymer was synthesized by polycondensation of epichlorohydrin, N,N-diisopropylamine, and ethylinediamine. The chemical and thermal properties of the polymer were investigated by FTIR, XRD, TGA, and viscosity measurements. The flocculation efficiency of the polymer was evaluated at different coagulant dose, organic load, and pH. The flocculation efficiency of this polymer was found to be higher over a pH range of 2−10 at its optimal dose of 80 mg/L. Morphological changes in the floc were studied by light and scanning electron microscopy. The zeta potential results clearly indicated that flocculation at the optimum doses is the result of charge neutralization and adsorption bridging. This study demonstrates the successful synthesis of the polymer, its excellent color removal efficiency (>98%) at lower doses, and effectiveness in dye wastewater treatment.Item Polyhydroxyalkanoates production from fermented paperboard mill wastewater using acetate-enriched bacteria(Springer-Verlag Berlin Heidelberg, 2017) Farghaly, Ahmed Mustafa; Enitan, Abimbola Motunrayo; Kumari, Sheena K.; Bux, Faizal; Tawfik, AhmedThe aim of the study was to investigate the use of dark fermented paperboard mill wastewater (PMW) containing volatile fatty acids for polyhydroxyalkanoates (PHA) production. Six sequencing batch reactors (SBRs) were initially fed with synthetic feed containing acetate and operated at different organic loading rates (OLRs) of 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 gCOD l-1 day-1 for PHA-storing bacteria enrichment. The maximum PHA content and yield (YPHA/S) were 67.44 ± 5.88 % and 0.45 ± 0.39 C-mol C-mol-1 at OLR of 1.5 gCOD l-1 day-1, respectively. The synthetic feed was replaced by dark fermented PMW effluent rich in acetate, butyrate, propionate, and lactate at the accumulation stage resulting in a PHA content and yield of 58.57 ± 4.02 % and 0.46 ± 0.09 C-mol C-mol-1, respectively. The maximum specific PHA production rate max ) amounted to 0.29 ± 0.1 C-mol C-mol-1 X-1 h-1.(qPHA Illumina MiSeq sequencing of bacterial 16S rRNA gene showed that Proteobacteria and Bacteroidetes increased from 37.4 to 77.6 % and from 2.49 to 17.66 % at enrich-ment and accumulation stages, respectively. Actinobacteria (15.44 %), Chloroflexi (8.15 %), Planctomycetes (7.46 %), and Acidobacteria (6.0 %) were detected at the enrichment SBRs.Item Dual role of Chlorella sorokiniana and Scenedesmus obliquus for comprehensive wastewater treatment and biomass production for bio-fuels(Elsevier, 2016) Gupta, Sanjay Kumar; Ansari, Faiz Ahmad; Shriwastav, Amritanshu; Sahoo, Narendra Kumar; Rawat, Ismail; Bux, FaizalMicroalgal treatment of raw sewage presents many complexities, mainly resulting from the inability of the algal species to sustain increased physiological stresses due to variable nutrient levels and high concentrations of organics. Chlorella sorokiniana and Scenedesmus obliquus have been identified to tolerate higher amounts of organic loading and physiological stresses. Nutrient removal, pathogen removal, and lipid accumulation with secondary or tertiary effluents have been demonstrated inde-pendently for these organisms. However, their potentials for accomplishing these objectives simulta-neously with raw sewage have not been investigated. This study presents comprehensive investigations of applicability of C. sorokiniana and S. obliquus to wastewater treatment without the requirement for any additional treatment. S. obliquus showed greater potential for removing organic carbon (76.13 ± 1.59%COD removal), nutrients (98.54 ± 3.30% N-removal, 97.99 ± 3.59% P-removal) and comparable pathogens removal (99.93 ± 0.12% total coliforms removal, 100% faecal coliform removal) in comparison to C. sorokiniana (69.38 ± 1.81% COD removal, 86.93 ± 3.49% N-removal, 68.24 ± 11.69% P-removal, 99.78 ± 0.12% total coliforms removal, 100% faecal coliform removal) with 15 days of cultivation with filtered raw sewage, but also encountered increased levels of stress (Fv/Fm of 0.48 ± 0.03) which accounted for increased lipid accumulation in the cells (23.26 ± 3.95% w/w) but might also affect their biomass productivity and treatment potential in longer applications. In comparison, C. sorokiniana demonstrated better adaptability to physiological stresses (Fv/Fm of 0.53 ± 0.01) and may be suitable for achieving comprehensive treatment and sufficient lipid accumulation (22.74 ± 3.11% w/w) without compromising these potentials during prolonged applications. These results highlight the importance of selecting algal species with better stress resistance to extend their applicability for comprehensive wastewater treatment and lipid production.Item An innovative electrochemical process to alleviate the challenges for harvesting of small size microalgae by using non-sacrificial carbon electrodes(Elsevier, 2015-09-04) Guldhe, Abhishek; Misra, Rohit; Singh, Poonam; Rawat, Ismail; Bux, FaizalHarvesting of microalgal biomass is still a bottleneck to its commercial scale application, due to small cell size, low culture densities, colloidal stability and thus unfavourable economics. Centrifugation is an efficient technique but the high energy consumption makes it unsuitable for low value microalgal products. Chemical flocculation and filtration are inefficient and time consuming methods for harvesting of small size microalgae. In this study, an electrochemical harvesting (ECH) process was assessed for the harvesting of a small size microalga Ankistrodesmus falcatus by using non-sacrificial carbon electrodes. Harvesting efficiency of ECH was compared to centrifugation and flocculation using alum and chitosan. The highest recovery efficiency was obtained by cen-trifugation (93% after 15 min) followed by ECH process (91% after 30 min), alum (86% after 60 min) and chitosan (55% after 60 min). However, the energy consumption of ECH process (1.76 kWh kg−1) was much lower than the centrifugation process (65.34 kWh kg−1). The biochemical composition of harvested biomass was also assessed, and it was found that the ECH process has no deteriorating effect on the quality of biomass. High recovery effi-ciency, low energy consumption and the use of non-sacrificial electrodes make ECH a sustainable harvesting technique for small size microalgae.Item Cultivation of Chlorella pyrenoidosa in outdoor open raceway pond using domestic wastewater as medium in arid desert region(Elsevier, 2016) Dahmani, Siham; Zerrouki, Djamal; Ramanna, Luveshan; Rawat, Ismail; Bux, FaizalChlorella pyrenoidosa was cultivated in secondary wastewater effluent to assess its nutrient removal capa-bilities. Wastewaters were obtained from a wastewater treatment plant located in Ouargla, Algeria. The experiments were conducted in winter under natural sunlight in an outdoor open raceway pond situated in the desert area. The highest biomass of the microalgae was found to be 1.71 ± 0.04 g/L. Temperatures ranged between 18 and 31 C. The average annual insolation was no less than 3500 h with an annual solar irradiance of more than 2000 kWh/m2. Analyses of different parameters including COD, NH4-N and TP were conducted throughout the cultivation period. Their average removal efficiencies were 78%, 95%and 81% respectively. The results demonstrated the potential of nutrient removal by microalgae grown on secondary wastewater in arid areas.Item Synthesis of biodiesel from Scenedesmus sp. by microwave and ultrasound assisted in situ transesterification using tungstated zirconia as a solid acid catalyst(Elsevier, 2014-05-20) Guldhe, Abhishek; Singh, Bhaskar; Rawat, Ismail; Bux, FaizalOleaginous Scenedesmus sp. was cultivated phototrophically in an open pond for biofuels production. The culture was harvested and subsequently dewatered and dried. The chemical properties of the Scenedesmus sp. lipids were determined as per standard ASTM methods. Biodiesel was synthesized by in situ transesterification from dried biomass using microwave and sonication techniques with tungstated zirconia (WO3/ZrO2) as a solid acid catalyst. In situ transesterification allowed minimizing the requirement of solvents by merging the two steps (i.e. extraction of lipid and conversion to biodiesel) to a single step. The use of a solid catalyst effectively reduces the purification cost of biodiesel due to ease of separation and potential for reuse. The conversion of Scenedesmus sp. lipids to biodiesel was determined by GC. Box–Behnken design was used for optimization of the variables to optimize the biodiesel yield and conversion. The efficiency of the two processes was compared.Item Evaluation of operating conditions for sustainable harvesting of microalgal biomass applying electrochemical method using non sacrificial electrodes(Elsevier, 2015) Misra, Rohit; Guldhe, Abhishek; Singh, Poonam; Rawat, Ismail; Stenström, Thor-Axel; Bux, FaizalThe efficient harvesting of microalgae is considered to be one of the challenging steps of algal biofuel production and a key factor limiting the commercial use of microalgae. To overcome the limitation of metallic electrodes depletion, the application of non-sacrificial electrode was investigated for the electrochemical harvesting (ECH) of microalgae. The effect of applied current, addition of electrolyte and initial pH were parameters investigated. The highest recovery efficiency of 83% was obtained for Scenedesmus obliquus at 1.5 A, initial pH 9 and 6 g L−1 NaCl with power consumption of 3.84 kWh kg−1. Recovery efficiency of ECH process was comparable to literature reported centrifugation, filtration and chemical flocculation techniques but with a much lower power consumption. The ECH process with addition of electrolyte enhanced the lipid extraction by 22% without any adverse effects. The ECH process with non sacrificial carbon electrodes could be a possible harvesting step at commercial scale microalgal biomass production.Item Thermal behavior and pyrolytic characteristics of freshwater Scenedesmus sp. biomass(Taylor and Francis, 2015) Ranjith Kumar, R.; Ramesh, D.; Mutanda, Taurai; Rawat, Ismail; Bux, FaizalThermal behavior and pyrolytic characteristics of Scenedesmus sp. biomass was investigated under five different heating rates of 5, 10, 20, 30, and 40°C/min by using thermogravimetric analysis. The calorific value and carbon content of the tested biomass sample was 17.65 kJ g−1 and 46.60%, respectively. The data generated for thermogravimetric analysis showed that three stages of thermal decompositions occurred for selected biomass materials for all of the tested heating rates. The maximum volatile matter was evolved in the second stage of thermal decomposition, with temperatures between 273 and 399°C. The maximum thermal decomposition temperature increased from 294 to 330°C as the heating rates increased from 5 to 40°C/min. The average apparent activation energy of selected biomass determined by Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) methods were found to be closer values 203 kJ mol−1.
- «
- 1 (current)
- 2
- 3
- »