Repository logo
 

Research Institutes

Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/840

Browse

Author: search.filters.author.Guldhe, AbhishekHas files: Yes

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    An innovative electrochemical process to alleviate the challenges for harvesting of small size microalgae by using non-sacrificial carbon electrodes
    (Elsevier, 2015-09-04) Guldhe, Abhishek; Misra, Rohit; Singh, Poonam; Rawat, Ismail; Bux, Faizal
    Harvesting of microalgal biomass is still a bottleneck to its commercial scale application, due to small cell size, low culture densities, colloidal stability and thus unfavourable economics. Centrifugation is an efficient technique but the high energy consumption makes it unsuitable for low value microalgal products. Chemical flocculation and filtration are inefficient and time consuming methods for harvesting of small size microalgae. In this study, an electrochemical harvesting (ECH) process was assessed for the harvesting of a small size microalga Ankistrodesmus falcatus by using non-sacrificial carbon electrodes. Harvesting efficiency of ECH was compared to centrifugation and flocculation using alum and chitosan. The highest recovery efficiency was obtained by cen-trifugation (93% after 15 min) followed by ECH process (91% after 30 min), alum (86% after 60 min) and chitosan (55% after 60 min). However, the energy consumption of ECH process (1.76 kWh kg−1) was much lower than the centrifugation process (65.34 kWh kg−1). The biochemical composition of harvested biomass was also assessed, and it was found that the ECH process has no deteriorating effect on the quality of biomass. High recovery effi-ciency, low energy consumption and the use of non-sacrificial electrodes make ECH a sustainable harvesting technique for small size microalgae.
  • Thumbnail Image
    Item
    Evaluation of operating conditions for sustainable harvesting of microalgal biomass applying electrochemical method using non sacrificial electrodes
    (Elsevier, 2015) Misra, Rohit; Guldhe, Abhishek; Singh, Poonam; Rawat, Ismail; Stenström, Thor-Axel; Bux, Faizal
    The efficient harvesting of microalgae is considered to be one of the challenging steps of algal biofuel production and a key factor limiting the commercial use of microalgae. To overcome the limitation of metallic electrodes depletion, the application of non-sacrificial electrode was investigated for the electrochemical harvesting (ECH) of microalgae. The effect of applied current, addition of electrolyte and initial pH were parameters investigated. The highest recovery efficiency of 83% was obtained for Scenedesmus obliquus at 1.5 A, initial pH 9 and 6 g L−1 NaCl with power consumption of 3.84 kWh kg−1. Recovery efficiency of ECH process was comparable to literature reported centrifugation, filtration and chemical flocculation techniques but with a much lower power consumption. The ECH process with addition of electrolyte enhanced the lipid extraction by 22% without any adverse effects. The ECH process with non sacrificial carbon electrodes could be a possible harvesting step at commercial scale microalgal biomass production.