Research Institutes
Permanent URI for this communityhttp://ir-dev.dut.ac.za/handle/10321/840
Browse
2 results
Search Results
Item Continuous biohydrogen production from starch wastewater via sequential dark-photo fermentation with emphasize on maghemite nanoparticles(Elsevier, 2015) Nasr, Mahmoud; Tawfik, Ahmed; Ookawara, Shinichi; Suzuki, Masaaki; Kumari, Sheena K.; Bux, FaizalHydrogen production from starch wastewater via sequential dark-photo fermentation process was investigated. Two anaerobic baffled reactors (ABRs) were operated in parallel at an OLR of 8.11 ± 0.97 g-COD/L/d, and a HRT of 15 h. ABR-1 and ABR-2 was inoculated with pre-treated sludge and sludge immobilized on maghemite nanoparticles, respectively. Better hydrogen yield of 104.75 ± 12.39 mL-H2/g-COD-removed was achieved in ABR-2 as compared to 66.22 ± 4.88 mL-H2/g-COD-removed in ABR-1. The effluent of ABR-2 was used for further hydrogen production by photo fermentation in ABR-3. An overall hydrogen yield of 166.83 ± 27.79 mL-H2/g-COD-removed was achieved at a total HRT of 30 h. 16S rRNA phylogeny showed that Clostridium and Rhodopseudomonas palustris species were dominant in ABR-1, ABR-2 and ABR-3, respectively.Item Effect of thermal pre-treatment on inoculum sludge to enhance bio-hydrogen production from alkali hydrolysed rice straw in a mesophilic anaerobic baffled reactor.(Taylor & Francis, 2013) Bux, Faizal; Kumari, Sheena K.; Tawfik, Ahmed; El-berry, HaithamThe effect of thermal pre-treatment on inoculum sludge for continuous H2 production from alkali hydrolysed rice straw using anaerobic baffled reactor (ABR) was investigated. Two reactors, ABR1 and ABR2, were inoculated with untreated and thermally pre-treated sludge, respectively. Both reactors were operated in parallel at a constant hydraulic retention time of 20 h and organic loading rate ranged from 0.5 to 2.16 g COD/L d. The results obtained indicated that ABR2 achieved a better hydrogen conversion rate and hydrogen yield as compared with ABR1. The hydrogen conversion rates were 30% and 24%, while the hydrogen yields were 1.19 and 0.97 mol H2/mol glucose for ABR2 and ABR1, respectively. Similar trend was observed for chemical oxygen demand (COD) and carbohydrate removal, where ABR2 provided a removal efficiency of 53±2.3% for COD and 46±2% for carbohydrate. The microbial community analysis using 16S rRNA phylogeny revealed the presence of different species of bacteria, namely Clostridium, Prevotella, Paludibacter, Ensifer, and Petrimonas within the reactors. Volatile fatty acids generated from ABR1 and ABR2 were mainly in the form of acetate and butyrate and a relatively low fraction of propionate was detected in ABR1. Based on these results, thermal pre-treatment of inoculum sludge is preferable for hydrogen production from hydrolysed rice straw.