Toxicity and biodegradability assays for hazardous landfill leachate and textile size effluents
Date
2005
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The cumulative effects of pollution have led to increased public concern, which is resulting in strict legislation on the discharge of wastes in whatever state they are present, i.e. solid, liquid or gas. Currently, in South Africa, effluents with a high organic load are sent to landfills or marine outfall because the cost of discharge to sewer is prohibitive. In regions where there is a net surplus of rainfall, landfill sites have the potential to pollute the groundwater due to saturated soil conditions. Therefore, many landfill sites should not receive liquid effluents. If liquid wastes are disposed onto landfills, then an alternate sink is required for the treatment of the high volumes of leachate that are generated. These concentrated effluents could then be treated by biological, chemical or physical methods to reduce the pollution load in the natural water resources. In this study, anaerobic digestion has been identified as one of the biological processes that can be applied to treat high-strength or toxic organic liquid effluents, since a survey conducted by Sacks (1997) indicated that many anaerobic digesters in the KwaZulu-Natal region have spare capacity. However before high strength industrial wastes can be treated in existing anaerobic digesters, their impact on the digestion process, i.e. their toxicity and biodegradability under anaerobic conditions, needs to be determined. During this project, several high-strength or toxic industrial effluents were tested to assess their toxicity and biodegradability under anaerobic conditions. These include three synthetic textile size effluents from the textile industry (Textile effluent 1, 2, and 3) and three hazardous landfillieachates (Holfontein, Shongweni and Aloes). In addition, the components of a textile effluent, i.e., starch and wax, were tested to determine which
Description
Submitted in fulfillment of the academic requirements for the Degree of Master of Technology: Biotechnology, Durban Institute of Technology, 2005.
Keywords
Citation
DOI
https://doi.org/10.51415/10321/1999