Research Publications (Water and Wastewater Technology)

Permanent URI for this collectionhttp://ir-dev.dut.ac.za/handle/10321/841

Browse

Now showing 1 - 20 of 37

A review on conventional and novel adsorbents to boost the sorption capacity of heavy metals : current status, challenges and future outlook
(Informa UK Limited, 2024-12-31) Kumar, Arvind; Indhur, Riona; Sheik, Abdul Gaffar; Krishna, Suresh Babu Naidu; Kumari, Sheena; Bux, Faizal
ABSTRACT Heavy metal contamination in aquatic environments has attracted global concern due to its detrimental impact on living organisms, including toxicity and carcinogenicity. Therefore, initiatives to remove these contaminants from wastewater to protect both the environment and the well-being of humans is imperative. Materials utilized for wastewater treatment in the developing world needs to satisfy the main criterion of being locally available, inexpensive and that do not require additional energy input or modifications. Adsorption is the foremost used technique to eliminate heavy metals due to its attractive features including flexible design, operation, and cost-effectiveness. This review article potentially focusses on the use of novel and conventional adsorbents such as g-C3N4, graphene, cellulosic aerogel, natural occurring soil and minerals, aquatic and terrestrial biomass-based adsorbents for heavy metal adsorption, whilst focusing the discussion on the context of the developing world. This heightened interest in g-C3N4, and graphene-based adsorbents owes their unique properties such as great surface area, impressive chemical and thermal stability, three-dimensional structure, and functionalized derivatives which have shown great adsorption capabilities for heavy metals elimination. Additionally, cellulosic aerogel, natural occurring soil and minerals, aquatic and terrestrial biomass is low cost, easily available and effectively removes heavy metals. Finally, current progress, major challenges and future outlook of novel and conventional adsorbent materials for heavy metal removal are discussed. Herein a roadmap is presented together with recommendations for future research to enhance the successful utilization of bio-sorbents in water purification systems such as wastewater treatment plants.
Digitalization of phosphorous removal process in biological wastewater treatment systems : challenges, and way forward
(Elsevier BV, 2024-05-10) Sheik, Abdul Gaffar; Krishna, Suresh Babu Naidu; Patnaik, Reeza; Ambati, Seshagiri Rao; Bux, Faizal; Kumari, Sheena K.
Phosphorus in wastewater poses a significant environmental threat, leading to water pollution and eutrophication. However, it plays a crucial role in the water-energy-resource recovery-environment (WERE) nexus. Recovering Phosphorus from wastewater can close the phosphorus loop, supporting circular economy principles by reusing it as fertilizer or in industrial applications. Despite the recognized importance of phosphorus recovery, there is a lack of analysis of the cyber-physical framework concerning the WERE nexus. Advanced methods like automatic control, optimal process technologies, artificial intelligence (AI), and life cycle assessment (LCA) have emerged to enhance wastewater treatment plants (WWTPs) operations focusing on improving effluent quality, energy efficiency, resource recovery, and reducing greenhouse gas (GHG) emissions. Providing insights into implementing modeling and simulation platforms, control, and optimization systems for Phosphorus recovery in WERE (P-WERE) in WWTPs is extremely important in WWTPs. This review highlights the valuable applications of AI algorithms, such as machine learning, deep learning, and explainable AI, for predicting phosphorus (P) dynamics in WWTPs. It emphasizes the importance of using AI to analyze microbial communities and optimize WWTPs for different various objectives. Additionally, it discusses the benefits of integrating mechanistic and data-driven models into plant-wide frameworks, which can enhance GHG simulation and enable simultaneous nitrogen (N) and Phosphorus (P) removal. The review underscores the significance of prioritizing recovery actions to redirect Phosphorus from effluent to reusable products for future considerations.
Nanoclay-based conductive and electromagnetic interference shielding properties of silver-decorated polyaniline and its nanocomposites
(Royal Society of Chemistry (RSC), 2023-01-01) Moolemane, Revanasiddappa; Nayak, Haridasa; Marudhachalam, Naveen; Coimbatore Venkatasubramanian, Anantha Krishnan; Arunachalam Chandra, Anirudh Raj; Murugappan Iyyappan, Arun; Krishna, Suresh Babu Naidu
Polymer composite materials have seen rapid growth in popularity over the past two decades due to their ability to successfully combine the benefits of several different polymer composites into a single product. Conducting polymers (CPs) are more promising materials than other polymers due to their diverse electronic applications, including electromagnetic interference (EMI) shielding, light-emitting diodes, energy storage devices, and the most sophisticated forms of sensors. In this study, the effect of nanoclay on the electrical conductivity, humidity, and EMI shielding properties of silver-decorated polyaniline and its nanocomposites has been investigated. Silver-decorated polyaniline was prepared by using an in situ polymerization technique at 0–5 1C in the presence of ammonium persulphate, which acts as an oxidizing agent. Varied weight% amounts of nano clay were mixed in the conducting silver decorated polyaniline to obtain their nanocomposite. The synthesized silver-decorated polyaniline and its composites were characterized by using several physical methods, viz., Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM). All these spectral data reveal the structural characteristics, morphology, and uniform distribution of silver and nano clay particles in the conducting polymer composites. The AC electrical conductivity data show that increasing the nanocrystal weight percentage increases its electrical conductivity. The electromagnetic interference shielding effectiveness of silver-decorated polyaniline nano clay composites shows 90% attenuation between 5 and 8.5 dB. Humidity sensitivity showed a linear relationship with increasing nano clay weight in the decorated polyaniline due to the porosity of the nanoclays and specific adsorption of moisture content. Hence, these composites can be used as a promising material for humid sensors, EMI shielding, battery capacitors, and other technological applications.
Green synthesis, characterization and biological activities of silver nanoparticles synthesized from Neolamarkia cadamba
(International Association of Physical Chemists (IAPC), 2023-07-01) Maheswari, Juluri; Anjum, Mohammed Reshma; Sankari, Mohan; Narasimha, Golla; Krishna, Suresh Babu Naidu; Kishori, Battini
Background and purpose: Metal nanoparticles are essential due to their unique catalytic, electrical, magnetic, and optical characteristics, as well as their prospective use in sensing, catalysis, and biological research. In recent years, researchers have focused on developing cost-effective and eco-friendly biogenic practices using the green synthesis of metal nanoparticles (AgNP). Experimental approach: In the present study, the aqueous extracts prepared from the leaf, stem, bark, and flower of Neolamarkia cadamba were used for the synthesis of silver nanoparticles. Synthesized silver nanoparticles were characterized using UV-Visible spectroscopy, zeta potential, dynamic light scattering, scanning electron microscope (SEM), and EDAX. Key results: The current study showed absorption of synthesized AgNPs at 425, 423, 410, and 400 nm. Dynamic light scattering of AgNPs Showed size distribution of AgNPs synthesized from leaf, stem, and flower aqueous extracts ranges from 80-200 nm and AgNPs prepared from bark extract ranges from 100-700 nm. Zeta-potential of the biosynthesized AgNPs was found as a sharp peak at -23.1 mV for the leaf, -27.0 mV for the stem, -34.1 mV for the bark, and -20.2 mV for the flower. Silver nanoparticles and crude extracts of Neolamarkia cadamba showed effective antibacterial, antifungal, and antioxidant activities. Conclusion: Silver nanoparticles have substantial antibacterial activity against Gram-positive bacteria and also exhibit the utmost antifungal activity against Aspergillus niger. The study concludes that the green synthesis of silver nanoparticles from N. cadamba leaf, stem, bark, and flower extract is a reliable and eco-friendly technique.
Mechanistic insight into SO4•−/•OH radical for enhancing stability and activity of LaMO3 perovskite toward detoxification of bulk pharmaceutical wastewater: Stoichiometric efficiency and controlled leaching study
(Elsevier BV, 2023-08) Kumar, Arvind; Prasad, Basheswar; Kumari, Sheena; Bux, Faizal
This study aims to investigate the detoxification of real pharmaceutical manufacturing wastewater by PMS activated with perovskite LaMO3 (M = Cu, Co, Fe), synthesized by citric sol–gel method. The textural properties of synthesized perovskite were monitored by BET, FESEM/EDS, TEM, XRD, FTIR, and XPS techniques. The effects of key parameters (PMS dose, catalyst, pH and reaction temperature) on ofloxacin degradation along with PMS utilization efficiency as well as PMS consumption were evaluated in detail. Catalyst LaCoO3 exhibited the excellent catalytic activity and stability towards the degradation of ofloxacin (97.11 %) and COD (79.41 %) at optimum operating conditions. Removal of ofloxacin and COD were suppressed by 7 % and 9 % over the fourth cycle, along with minor leaching of Co were observed. Quenching experiments and EPR results demonstrated that both ROS species (SO4•− and •OH) were dominant species for ofloxacin degradation in LaCoO3/PMS system. The treatment cost for ofloxacin degradation in LaCoO3/PMS system was estimated to be 40.78$/m3 of real pharmaceutical wastewater. Six plausible degradation pathways of ofloxacin were proposed based on intermediate compounds identified by GC-MS and reported literature.
Water quality modelling to assess sources and transport of pathogens within uMsunduzi catchment, South Africa
(2022-05) Ngubane, Zesizwe; Bergion, Viktor; Dzwairo, Bloodless; Troell, Karin; Amoah, Isaac; Stenström, Thor Axel; Sokolova, Ekaterina
Water quality modelling is essential to integrated water resources management and decision-making, as it improves the understanding of the spatial and temporal dynamics of chemical and microbial pollution in a river system. Understanding of the spatio-temporal dynamics of pollution and accurate prediction of its pollution hotspots are vital to improving the microbial quality of surface water. South African rivers generally receive waste from inadequate wastewater infrastructure, mines, and farming activities, among others. The uMsunduzi River in KwaZulu-Natal, South Africa, is among rivers with recorded poor to very poor water quality. To identify parts of the uMsunduzi River that are polluted by Escherichia coli (E. coli) and Cryptosporidium, chosen to represent bacteria and protozoan parasites respectively, this study mapped out pollutants emanating from point and non-point sources using the Soil and Water Assessment Tool (SWAT) model. SWAT uses a combination of empirical and physically based equations that use readily available inputs and enables users to study long term impacts. Streamflow calibration in the upper and lower reaches of the catchment showed good performance with R² of 0.64 and 0.58, respectively. The SWAT module for predicting microorganism loads and concentrations in the river was used. The main faecal sources in the uMsunduzi catchment can be summarised as: wastewater treatment plant (WWTP), broken sewers in the urban area, and faecal droppings from grazing livestock. The microorganism loads from these sources were described in SWAT using data from different local water authorities and stakeholders. With respect to E. coli, the output from SWAT was compared to observed data from four points within the catchment representing upper rural, upper urban, lower urban, and lower rural parts. The output from the SWAT model showed slightly low variability, however, the trend in the SWAT model simulations followed the observed data patterns in most subbasins. The trend with Cryptosporidium was such that concentrations are higher downstream the WWTP than upstream, though insufficient data exists to compare the model Cryptosporidium output with observed data. Overall, the model microbial output showed that in rural areas, animals contribute more to pathogen loads than human sources. Human sources were more prominent in urban areas owing to the major contributions from wastewater infrastructure. The microbial output data from the SWAT model were used as input for quantitative microbial risk assessment (QMRA). Considering that not all E. coli are pathogenic, 8% of E. coli was assumed as pathogenic following various studies. The exposure routes investigated were direct ingestion of the uMsunduzi River water during recreational swimming, canoeing training, and drinking. The exposed population was categorised as children (<18 years old) and adults (>18 years old). The probability of infection for most users exceeds the acceptable level for drinking and recreation as outlined in the South African water quality guidelines and by the World Health Organisation (WHO).
The results of this study can be used as a baseline to assess the economic and health implications of different management plans, resulting in better-informed, cost-effective, and impactful decision-making.
Phenotypic and genotypic characterisation of an unique indigenous hypersaline unicellular cyanobacterium, Euhalothece sp.nov
(Elsevier, 2018) Mogany, Trisha; Swalaha, Feroz Mahomed; Allam, Mushal; Mtshali, Phillip Senzo; Ismail, Arshad; Kumari, Sheena K.; Bux, Faizal
A novel halotolerant species of cyanobacterium of the order Chroococcales was isolated from hypersaline estuary in Kwa-Zulu Natal, South Africa. A comprehensive polyphasic approach viz., cell morphology, pigment com-position and complete genome sequence analysis was conducted to elucidate the taxonomic position of the isolated strain. The blue-green oval to rod-shaped cells were 14–18 μm in size, and contained a high amount of phycocyanin pigments. The strain was moderate thermotolerant/alkalitolerant halophile with the optimum conditions for growth at 35 °C, pH 8.5 and 120 g/l of NaCl. Based on 16S rRNA gene sequence phylogeny, the strain was related to members of the ‘Euhalothece’ subcluster (99%). The whole genome sequence was de-termined, and the annotated genes showed a 90% sequence similarity to the gas-vacuolate, spindle-shaped Dactylococcopsis salina PCC 8305. The size of the genome was determined to be 5,113,178 bp and contained 4332 protein-coding genes and 69 RNA genes with a G + C content of 46.7%. Genes encoding osmoregulation, oxi-dative stress, heat shock, persister cells, and UV-absorbing secondary metabolites, among others, were identiﬁed. Based on the phylogenetic analysis of the 16S rRNA gene sequences, physiological data, pigment compositions and genomic data, the strain is considered to represent a novel species of Euhalothece.
Sorption isotherms, kinetic and optimization process of amino acid proline based polymer nanocomposite for the removal of selected textile dyes from industrial wastewater
(Elsevier, 2016-10-18) Raghunath, Sharista; Anand, Krishnan; Gengan, Robert Moonsamy; Nayunigari, Mithil Kumar; Maity, Arjun
In this article, adsorption and kinetic studies were carried out on three textile dyes, namely Reactive Blue 222 (RB 222), Reactive Red 195 (RR 195) and Reactive Yellow 145 (RY 145). The dyes studied in a mixture were adsorbed under various conditions onto PRO-BEN, a bentonite modiﬁed with a new cationic proline polymer (L-proline-epichlorohydrin polymer). The proline polymer was characterized by 1H NMR, Fourier transform infrared spec-troscopy (FT-IR), dynamic light scattering (DLS) and TEM. The PRO-BEN composite was characterized by FT-IR, dynamic light scattering (DLS) (zeta potential), TEM imaging, SEM/EDX and X-ray photoelectron spectroscopy (characterize the binding energy). During adsorption studies, factors involving pH, temperature, the initial con-centrations of the dyes and the quantity of PRO-BEN used during adsorption were established. The results re-vealed that the adsorption mechanism was categorized by the Langmuir type 1 isotherm. The adsorption data followed the pseudo-second order kinetic model. The intraparticle diffusion model indicated that adsorption did not only depend on the intraparticle diffusion of the dyes. The thermodynamic parameters veriﬁed that the adsorption process was spontaneous and exothermic. The Gibbs free energy values indicated that physisorption had occurred. Successful adsorption of dyes from an industrial efﬂuent was achieved. Desorption studies concluded that PRO-BEN desorbed the dyes better than alumina. This can thereby be viewed as a recycla-ble remediation material. The PRO-BEN composite could be a cost efﬁcient alternative towards the removal of or-ganic dyes in wastewater treatment.
Characterization of brewery wastewater composition
(WASET, 2015) Enitan, Abimbola Motunrayo; Adeyemo, Josiah; Kumari, Sheena K.; Swalaha, Feroz Mahomed; Bux, Faizal
Industries produce millions of cubic meters of effluent every year and the wastewater produced may be released into the surrounding water bodies, treated on-site or at municipal treatment plants. The determination of organic matter in the wastewater generated is very important to avoid any negative effect on the aquatic ecosystem. The scope of the present work is to assess the physicochemical composition of the wastewater produced from one of the brewery industry in South Africa. This is to estimate the environmental impact of its discharge into the receiving water bodies or the municipal treatment plant. The parameters monitored for the quantitative analysis of brewery wastewater include biological oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids, volatile suspended solids, ammonia, total oxidized nitrogen, nitrate, nitrite, phosphorus and alkalinity content. In average, the COD concentration of the brewery effluent was 5340.97 mg/l with average pH values of 4.0 to 6.7. The BOD5 and the solids content of the wastewater from the brewery industry were high. This means that the effluent is very rich in organic content and its discharge into the water bodies or the municipal treatment plant could cause environmental pollution or damage the treatment plant. In addition, there were variations in the wastewater composition throughout the monitoring period. This might be as a result of different activities that take place during the production process, as well as the effects of peak period of beer production on the water usage.
Synthesis and performance evaluation of a new polymeric composite for the treatment of textile wastewater
(ACS Publications, 2015) Gupta, Sanjay Kumar; Nayunigari, Mithil Kumar; Misra, Rohit; Ansari, Faiz Ahmad; Dionysiou, Dionysios (Dion) D.; Maity, Arjun; Bux, Faizal
Azo dyes are synthetic colorants widely used in textile industry and are considered to be major contaminants in dye wastewater. Coagulation−ﬂocculation is most preferred techniques to treat dye wastewater. A N,N-diisopropylamine-based new polymer was synthesized by polycondensation of epichlorohydrin, N,N-diisopropylamine, and ethylinediamine. The chemical and thermal properties of the polymer were investigated by FTIR, XRD, TGA, and viscosity measurements. The ﬂocculation eﬃciency of the polymer was evaluated at diﬀerent coagulant dose, organic load, and pH. The ﬂocculation eﬃciency of this polymer was found to be higher over a pH range of 2−10 at its optimal dose of 80 mg/L. Morphological changes in the ﬂoc were studied by light and scanning electron microscopy. The zeta potential results clearly indicated that ﬂocculation at the optimum doses is the result of charge neutralization and adsorption bridging. This study demonstrates the successful synthesis of the polymer, its excellent color removal eﬃciency (>98%) at lower doses, and eﬀectiveness in dye wastewater treatment.
Uptake of inorganic and organic nutrient species during cultivation of a Chlorella Isolate in Anaerobically digested dairy waste
(American Institute of Chemical Engineers, 2016-06-23) Wahal, Shantanu; Viamajala, Sridhar
A natural assemblage of microalgae from a facultative lagoon system treating municipal wastewater was enriched for growth in the efﬂuents of an anaerobic digester processing dairy waste. A green microalga with close resemblance to Chlorella sp. was found to be dominant after multiple cycles of sub-culturing. Subsequently, the strain (designated as LLAI) was isolated and cultivated in 203 diluted digester efﬂuents under various incident light intensities (255–1,100 mmoles m22 s21) to systematically assess growth and nutrient utilization. Our results showed that LLAI production increased with increasing incident light and a maximum productivity of 0.34 g L21 d21 was attained when the incident irradiance was 1,100 mmoles m22 s21. Lack of growth in the absence of light indicated that the cul-tures did not grow heterotrophically on the organic compounds present in the medium. How-ever, the cultures were able to uptake organic N and P under phototrophic conditions and our calculations suggest that the carbon associated with these organic nutrients contributed signiﬁcantly to the production of biomass. Overall, under high light conditions, LLAI cul-tures utilized half of the soluble organic nitrogen and >90% of the ammonium, orthophos-phate, and dissolved organic phosphorus present in the diluted waste. Strain LLAI was also found to accumulate triacylglycerides (TAG) even before the onset of nutrient limitation and a lipid productivity of 37 mg-TAG L21 d21 was measured in cultures incubated at an inci-dent irradiance of 1,100 mmoles m22 s21. The results of this study suggest that microalgae isolates from natural environments are well-suited for nutrient remediation and biomass pro-duction from wastewater containing diverse inorganic and organic nutrient species
Polyhydroxyalkanoates production from fermented paperboard mill wastewater using acetate-enriched bacteria
(Springer-Verlag Berlin Heidelberg, 2017) Farghaly, Ahmed Mustafa; Enitan, Abimbola Motunrayo; Kumari, Sheena K.; Bux, Faizal; Tawfik, Ahmed
The aim of the study was to investigate the use of dark fermented paperboard mill wastewater (PMW) containing volatile fatty acids for polyhydroxyalkanoates (PHA) production. Six sequencing batch reactors (SBRs) were initially fed with synthetic feed containing acetate and operated at different organic loading rates (OLRs) of 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 gCOD l-1 day-1 for PHA-storing bacteria enrichment. The maximum PHA content and yield (YPHA/S) were 67.44 ± 5.88 % and 0.45 ± 0.39 C-mol C-mol-1 at OLR of 1.5 gCOD l-1 day-1, respectively. The synthetic feed was replaced by dark fermented PMW efﬂuent rich in acetate, butyrate, propionate, and lactate at the accumulation stage resulting in a PHA content and yield of 58.57 ± 4.02 % and 0.46 ± 0.09 C-mol C-mol-1, respectively. The maximum speciﬁc PHA production rate max ) amounted to 0.29 ± 0.1 C-mol C-mol-1 X-1 h-1.(qPHA Illumina MiSeq sequencing of bacterial 16S rRNA gene showed that Proteobacteria and Bacteroidetes increased from 37.4 to 77.6 % and from 2.49 to 17.66 % at enrich-ment and accumulation stages, respectively. Actinobacteria (15.44 %), Chloroﬂexi (8.15 %), Planctomycetes (7.46 %), and Acidobacteria (6.0 %) were detected at the enrichment SBRs.
Dual role of Chlorella sorokiniana and Scenedesmus obliquus for comprehensive wastewater treatment and biomass production for bio-fuels
(Elsevier, 2016) Gupta, Sanjay Kumar; Ansari, Faiz Ahmad; Shriwastav, Amritanshu; Sahoo, Narendra Kumar; Rawat, Ismail; Bux, Faizal
Microalgal treatment of raw sewage presents many complexities, mainly resulting from the inability of the algal species to sustain increased physiological stresses due to variable nutrient levels and high concentrations of organics. Chlorella sorokiniana and Scenedesmus obliquus have been identiﬁed to tolerate higher amounts of organic loading and physiological stresses. Nutrient removal, pathogen removal, and lipid accumulation with secondary or tertiary efﬂuents have been demonstrated inde-pendently for these organisms. However, their potentials for accomplishing these objectives simulta-neously with raw sewage have not been investigated. This study presents comprehensive investigations of applicability of C. sorokiniana and S. obliquus to wastewater treatment without the requirement for any additional treatment. S. obliquus showed greater potential for removing organic carbon (76.13 ± 1.59%COD removal), nutrients (98.54 ± 3.30% N-removal, 97.99 ± 3.59% P-removal) and comparable pathogens removal (99.93 ± 0.12% total coliforms removal, 100% faecal coliform removal) in comparison to C. sorokiniana (69.38 ± 1.81% COD removal, 86.93 ± 3.49% N-removal, 68.24 ± 11.69% P-removal, 99.78 ± 0.12% total coliforms removal, 100% faecal coliform removal) with 15 days of cultivation with ﬁltered raw sewage, but also encountered increased levels of stress (Fv/Fm of 0.48 ± 0.03) which accounted for increased lipid accumulation in the cells (23.26 ± 3.95% w/w) but might also affect their biomass productivity and treatment potential in longer applications. In comparison, C. sorokiniana demonstrated better adaptability to physiological stresses (Fv/Fm of 0.53 ± 0.01) and may be suitable for achieving comprehensive treatment and sufﬁcient lipid accumulation (22.74 ± 3.11% w/w) without compromising these potentials during prolonged applications. These results highlight the importance of selecting algal species with better stress resistance to extend their applicability for comprehensive wastewater treatment and lipid production.
An innovative electrochemical process to alleviate the challenges for harvesting of small size microalgae by using non-sacriﬁcial carbon electrodes
(Elsevier, 2015-09-04) Guldhe, Abhishek; Misra, Rohit; Singh, Poonam; Rawat, Ismail; Bux, Faizal
Harvesting of microalgal biomass is still a bottleneck to its commercial scale application, due to small cell size, low culture densities, colloidal stability and thus unfavourable economics. Centrifugation is an efﬁcient technique but the high energy consumption makes it unsuitable for low value microalgal products. Chemical ﬂocculation and ﬁltration are inefﬁcient and time consuming methods for harvesting of small size microalgae. In this study, an electrochemical harvesting (ECH) process was assessed for the harvesting of a small size microalga Ankistrodesmus falcatus by using non-sacriﬁcial carbon electrodes. Harvesting efﬁciency of ECH was compared to centrifugation and ﬂocculation using alum and chitosan. The highest recovery efﬁciency was obtained by cen-trifugation (93% after 15 min) followed by ECH process (91% after 30 min), alum (86% after 60 min) and chitosan (55% after 60 min). However, the energy consumption of ECH process (1.76 kWh kg−1) was much lower than the centrifugation process (65.34 kWh kg−1). The biochemical composition of harvested biomass was also assessed, and it was found that the ECH process has no deteriorating effect on the quality of biomass. High recovery efﬁ-ciency, low energy consumption and the use of non-sacriﬁcial electrodes make ECH a sustainable harvesting technique for small size microalgae.
Cultivation of Chlorella pyrenoidosa in outdoor open raceway pond using domestic wastewater as medium in arid desert region
(Elsevier, 2016) Dahmani, Siham; Zerrouki, Djamal; Ramanna, Luveshan; Rawat, Ismail; Bux, Faizal
Chlorella pyrenoidosa was cultivated in secondary wastewater efﬂuent to assess its nutrient removal capa-bilities. Wastewaters were obtained from a wastewater treatment plant located in Ouargla, Algeria. The experiments were conducted in winter under natural sunlight in an outdoor open raceway pond situated in the desert area. The highest biomass of the microalgae was found to be 1.71 ± 0.04 g/L. Temperatures ranged between 18 and 31 C. The average annual insolation was no less than 3500 h with an annual solar irradiance of more than 2000 kWh/m2. Analyses of different parameters including COD, NH4-N and TP were conducted throughout the cultivation period. Their average removal efﬁciencies were 78%, 95%and 81% respectively. The results demonstrated the potential of nutrient removal by microalgae grown on secondary wastewater in arid areas.
A theoretical approach to using faecal indicator data to model norovirus concentration in surface water for QMRA : Glomma River, Norway
(Elsevier, 2016) Petterson, Susan R.; Stenström, Thor-Axel; Ottoson, Jakob
Monitoring of faecal indicator organisms, such as Escherichia coli, in environmental and drinking waters is inadequate for the protection public health, primarily due to the poor relationship between E. coli and the occurrence of human pathogens, especially viruses, in environmental samples. Nevertheless, measurements of faecal indicator organisms within the risk based approach, can provide valuable information related to the magnitude and variability of faecal contamination, and hence provide insight into the expected level of potential pathogen contamination. In this study, a modelling approach is presented that estimates the concentration of norovirus in surface water relying on indicator monitoring data, combined with specific assumptions regarding the source of faecal contamination. The model is applied to a case study on drinking water treatment intake from the Glomma River in Norway. Norovirus concentrations were estimated in two sewage sources discharging into the river upstream of the drinking water offtake, and at the source water intake itself. The characteristics of the assumed source of faecal contamination, including the norovirus prevalence in the community, the size of the contributing population and the relative treatment efficacy for indicators and pathogens in the sewage treatment plant, influenced the magnitude and variability in the estimated norovirus concentration in surface waters. The modelling exercise presented is not intended to replace pathogen enumeration from environmental samples, but rather is proposed as a complement to better understand the sources and drivers of viruses in surface waters. The approach has the potential to inform sampling regimes by identifying when the best time would be to collect environmental samples; fill in the gaps between sparse datasets; and potentially extrapolate existing datasets in order to model rarer events such as an outbreak in the contributing population. In addition, and perhaps most universally, in the absence of pathogen data, this approach can be used as a first step to predict the source water pathogen concentration under different contamination scenarios for the purpose of quantifying microbial risks.
Effect of interaction of methanol leaf extract of Spondias Mombin (Linn) and Amoxicillin on some Diarrheagenic Escherichia coli
(Pharmacotherapy Group, 2016-03) Adegoke, Anthony Ayodeji; Aiyegoro, Olayinka A.; Stenström, Thor-Axel
Purpose: To study the effect of interaction between methanol leaf extract of Spondias mombin and amoxicillin on diarrheagenic Escherichia coli (DEC). Methods: Cold methanol extraction of Spondias mombin leaf and its phytochemical screening were carried out. Isolated, characterized and identified strains of enterotoxigenic E. coli (ETEC), enteroinvasive E. coli (EIEC), and enterohemorrhagic E. coli (EHEC) from watery stool, mucoid bloody stool and watery bloody stool of diarrheal patients, respectively, were confirmed and typed by conventional and molecular methods. The minimum inhibitory concentration (MIC) and ½ MIC at which the extract and amoxicillin interacted were determined. Results: Spondias mombin extract showed remarkable antibacterial activity at extract concentration of 50 - 200 mg/mL with a mean zone of inhibition (MZ) ≥ 11.1 and activity index (AI) of 0.8 - 1.1. MIC of 12.5 mg/mL was observed for both ETEC and EIEC while it was 6.25 mg/mL for EHEC. The extract showed synergistic interaction at various concentrations (50 – 200, 12.5 and 6.25 mg/mL, respectively) with amoxycillin against ETEC, EHEC and EIEC. Synergy across a wide range of concentrations compared favourably with the ½ MIC and MIC of both extract and amoxycillin for ETEC. The extract contained moderate levels of alkaloids, flavonoids and tannins, as well as a lot of saponins, and low levels of phenol. The activity of the extract of Spondias mombin compares well with that of amoxicillin with AI ≥ 1 in some cases. Conclusion: A synergistic interaction between the leaf extract of S. mombin and amoxicillin confirms the extract as potential antibacterial agent but further studies are required to ascertain this.
Contribution of wastewater irrigation to Soil Transmitted Helminths infection among vegetable farmers in Kumasi, Ghana
(National Centre for Biotechnology Information, 2016-12-06) Amoah, Isaac Dennis; Abubakari, Amina; Stenstrom, Thor Axel; Abaidoo, Robert Clement; Seidu, Razak
Wastewater irrigation is associated with several benefits but can also lead to significant health risks. The health risk for contracting infections from Soil Transmitted Helminths (STHs) among farmers has mainly been assessed indirectly through measured quantities in the wastewater or on the crops alone and only on a limited scale through epidemiological assessments. In this study we broadened the concept of infection risks in the exposure assessments by measurements of the concentration of STHs both in wastewater used for irrigation and the soil, as well as the actual load of STHs ova in the stool of farmers and their family members (165 and 127 in the wet and dry seasons respectively) and a control group of non-farmers (100 and 52 in the wet and dry seasons, respectively). Odds ratios were cal-culated for exposure and non-exposure to wastewater irrigation. The results obtained indi-cate positive correlation between STH concentrations in irrigation water/soil and STHs ova as measured in the stool of the exposed farmer population. The correlations are based on reinfection during a 3 months period after prior confirmed deworming. Farmers and family members exposed to irrigation water were three times more likely as compared to the con-trol group of non-farmers to be infected with Ascaris (OR = 3.9, 95% CI, 1.15–13.86) and hookworm (OR = 3.07, 95% CI, 0.87–10.82). This study therefore contributes to the evi-dence-based conclusion that wastewater irrigation contributes to a higher incidence of STHs infection for farmers exposed annually, with higher odds of infection in the wet season.
Synthesis of biodiesel from Scenedesmus sp. by microwave and ultrasound assisted in situ transesterification using tungstated zirconia as a solid acid catalyst
(Elsevier, 2014-05-20) Guldhe, Abhishek; Singh, Bhaskar; Rawat, Ismail; Bux, Faizal
Oleaginous Scenedesmus sp. was cultivated phototrophically in an open pond for biofuels production. The culture was harvested and subsequently dewatered and dried. The chemical properties of the Scenedesmus sp. lipids were determined as per standard ASTM methods. Biodiesel was synthesized by in situ transesteriﬁcation from dried biomass using microwave and sonication techniques with tungstated zirconia (WO3/ZrO2) as a solid acid catalyst. In situ transesteriﬁcation allowed minimizing the requirement of solvents by merging the two steps (i.e. extraction of lipid and conversion to biodiesel) to a single step. The use of a solid catalyst effectively reduces the puriﬁcation cost of biodiesel due to ease of separation and potential for reuse. The conversion of Scenedesmus sp. lipids to biodiesel was determined by GC. Box–Behnken design was used for optimization of the variables to optimize the biodiesel yield and conversion. The efﬁciency of the two processes was compared.
Evaluation of operating conditions for sustainable harvesting of microalgal biomass applying electrochemical method using non sacriﬁcial electrodes
(Elsevier, 2015) Misra, Rohit; Guldhe, Abhishek; Singh, Poonam; Rawat, Ismail; Stenström, Thor-Axel; Bux, Faizal
The efficient harvesting of microalgae is considered to be one of the challenging steps of algal biofuel production and a key factor limiting the commercial use of microalgae. To overcome the limitation of metallic electrodes depletion, the application of non-sacrificial electrode was investigated for the electrochemical harvesting (ECH) of microalgae. The effect of applied current, addition of electrolyte and initial pH were parameters investigated. The highest recovery efficiency of 83% was obtained for Scenedesmus obliquus at 1.5 A, initial pH 9 and 6 g L−1 NaCl with power consumption of 3.84 kWh kg−1. Recovery efficiency of ECH process was comparable to literature reported centrifugation, filtration and chemical flocculation techniques but with a much lower power consumption. The ECH process with addition of electrolyte enhanced the lipid extraction by 22% without any adverse effects. The ECH process with non sacrificial carbon electrodes could be a possible harvesting step at commercial scale microalgal biomass production.

Browse

Recent Submissions